Round Bar
Smooth
Different Colors Can Be Achieved.
Above 2.5mm
Industral
Fiberglass Reinforced Rod
Pultrusion
FRP
GFRP
Polyester FRP
Can Be Used as Canopy Rods, Flag Pole, etc.
JLF
Pallet, Plastic Bag, Carton, etc.
9.5mm, etc.
Nanjing, China
3926909090
Product Description
1. Properties of FRP pultruded profiles
A. High strength
FRP is stronger than structural steel on a pound-for pound basis. It has been used to buildings, walkway, sub-floors and platforms.
B. Light weight
FRP is 20-25% the weight of steel and 70% the weight of aluminum. FRP are easily transported, handled and lifted into place. Total structures can often be preassembled and shipped to the job site ready to installation.
C. Anti-corrosion
FRP will not rot and are impervious to a broad range of corrosive elements. This feature makes FRP a natural selection for indoor or outdoor structures in pulp and paper mills, chemical plants, water and sewage treatment plants, structural near salt water and other corrosive environments.
D. Electro-magnetic transparency
FRP are transparent to radio waves, microwaves and other electromagnetic. It is widely used to make antennas.
E. Non-conductive
FRP has low thermal/ electrical conductivity.
F. Dimensional stability
The coefficient of thermal expansion of FRP is slightly less than steel and significantly less than aluminum.
G. Aesthetics
FRP are pigmented throughout the thickness of the part and can be made to virtually any desired custom color. Special surfacing veils are also available to create special surface appearances such as wood grain, marble, granite, etc.
2. Fiberglass round bars are manufactured with the pultrusion process after choosing the correct raw materials major including the resin, fibers and additives according to the profiles requirement including mechanical strength, electrical insulation, anti-corrosion etc.
3. Fiberglass round bars can meet the customer's requirements by using different combination of resin, fibers and others.
4. Fiberglass round bars offer a unique combination of chemical resistance, size stability, high strength, and thermal/electric non-conductivity, etc.
5. Fiberglass round bars can be used as canopy rods, underground cable jackets, cable cores (bearing tensile stress), handles of spade and hammer, flag pole, tent pole, fishing pole etc.
A. High strength
FRP is stronger than structural steel on a pound-for pound basis. It has been used to buildings, walkway, sub-floors and platforms.
B. Light weight
FRP is 20-25% the weight of steel and 70% the weight of aluminum. FRP are easily transported, handled and lifted into place. Total structures can often be preassembled and shipped to the job site ready to installation.
C. Anti-corrosion
FRP will not rot and are impervious to a broad range of corrosive elements. This feature makes FRP a natural selection for indoor or outdoor structures in pulp and paper mills, chemical plants, water and sewage treatment plants, structural near salt water and other corrosive environments.
D. Electro-magnetic transparency
FRP are transparent to radio waves, microwaves and other electromagnetic. It is widely used to make antennas.
E. Non-conductive
FRP has low thermal/ electrical conductivity.
F. Dimensional stability
The coefficient of thermal expansion of FRP is slightly less than steel and significantly less than aluminum.
G. Aesthetics
FRP are pigmented throughout the thickness of the part and can be made to virtually any desired custom color. Special surfacing veils are also available to create special surface appearances such as wood grain, marble, granite, etc.
2. Fiberglass round bars are manufactured with the pultrusion process after choosing the correct raw materials major including the resin, fibers and additives according to the profiles requirement including mechanical strength, electrical insulation, anti-corrosion etc.
3. Fiberglass round bars can meet the customer's requirements by using different combination of resin, fibers and others.
4. Fiberglass round bars offer a unique combination of chemical resistance, size stability, high strength, and thermal/electric non-conductivity, etc.
5. Fiberglass round bars can be used as canopy rods, underground cable jackets, cable cores (bearing tensile stress), handles of spade and hammer, flag pole, tent pole, fishing pole etc.
| view/instance | type | dimension (mm) | approximate weight(g/m) |
| | round rod | A | |
| J LF-RR12 | 12.7 | 240 | |
| J LF-RR20 | 20 | 610 | |
| J LF-RR22 | 22 | 740 | |
| J LF-RR24 | 24 | 880 | |
| J LF-RR25 | 25.4 | 990 | |
| Note: Customer designed profiles is also available. | |||
