Wheelchair Fall Prevention Safety Seat Belt Sensor - Easy Released Magnet Design
Model: #G Pull Release Seat Belt
Features:
1) Can be used on wheelchair.
2) Can help to prevent fall accidents and ensure personal safety.
3) Works with many models of our alarm / monitor.
4) It is suitable for residents / elderly with low agility.
5) The alarm sounds immediately when magnet switch is released from the belt, alerting caregiver to a potential fall.
Seat Belt Installation:
1) Place seat belt on the wheelchair.
2) Fix the belt ends to the wheelchair frame.
3) Connect the seat belt RJ11 phone wire plug with the alarm monitor.
How to Use:
1) Open the seat belt by pulling the red belt which has magnetic switch.
2) Put it around the patient's waist, then place the red belt back on its place.
3) Seat belt alarm is ready to work as the standby mode.
4) Pull the red belt to release the alarm
