FEP
FEP
High-Performance Plastic
300-400 MPa
-196~200 Centigrade
Hongda
Plywood Case
Length100-2000, Width100-1000, Thickness1-50mm
China
3904690000
Product Description
FEP SHEET
FEP is a modified category of PTFE. It basically retains the properties of PTFE, like excellent high- low temperature resistance, chemical stability, dielectricity, high non-adhesiveness and mechanical strength. Compare to PTFE, it has better elasticity and transparency and is only 50° C lower than PTFE by limit of high temperature resistance.
Features:
FEP sheet is manufactured by molding and extruding method with FEP resin. FEP sheet has low coefficient of friction and a wide range of practicable temperature from -196° ~ +200° C.
Manufacturing method: Molding, injection, machinery processing
1. Excellent electrical insulation
2. Chemical stability
3. Heat resistant
4. Excellent mechanical property
5. Size: Standard & custom made
Specification:
Molded sheet: Thickness 1-50mm, width 100-1000mm, length 100-2000mm
Extruded sheet: 0.05-0.5mm, width less than 500mm, length more than 10000mm
Molded rod: Dia5-25mm, length 200mm;
Dia30-100, length 100-150mm
Extruded tube: Dia3-25mm, any length;
Dia26-200mm, length more than 4200mm
Technical index:
FEP is a modified category of PTFE. It basically retains the properties of PTFE, like excellent high- low temperature resistance, chemical stability, dielectricity, high non-adhesiveness and mechanical strength. Compare to PTFE, it has better elasticity and transparency and is only 50° C lower than PTFE by limit of high temperature resistance.
Features:
FEP sheet is manufactured by molding and extruding method with FEP resin. FEP sheet has low coefficient of friction and a wide range of practicable temperature from -196° ~ +200° C.
Manufacturing method: Molding, injection, machinery processing
1. Excellent electrical insulation
2. Chemical stability
3. Heat resistant
4. Excellent mechanical property
5. Size: Standard & custom made
Specification:
Molded sheet: Thickness 1-50mm, width 100-1000mm, length 100-2000mm
Extruded sheet: 0.05-0.5mm, width less than 500mm, length more than 10000mm
Molded rod: Dia5-25mm, length 200mm;
Dia30-100, length 100-150mm
Extruded tube: Dia3-25mm, any length;
Dia26-200mm, length more than 4200mm
Technical index:
| Item | Unit | Index | |
| Rod, sheet | Tube, film | ||
| Density | g/cm 3 | 2.14-2.17 | |
| Tensile strength | MPa | 20 | 14 |
| Elongation at break | % | 200 | 175 |
| Temperature range | Celcius degree | -196~200 | |
| Dielectric strength | KV/mm | 15 | |
