BT-PL800M-43-50N4
Mobile phone
Wireless
3G
Data
CE, ISO, RoHS
New
Conexontek
Carton
20W
Shenzhen
8517629900
Product Description
FDD-LTE 800MHz 20W-PA Module with LNA
PIN 2 -------- RS485B;
PIN 3,4 -------- GND
PIN 5 -------- NC;
PIN 6 -------- DC+28V.
5 Connectors of MCX for PA IN & LNA OUT&LNA IN
Monitoring for downlink PA and uplink LNA with Baud rate9600.
| TX | Technical Parameters |
| Frequency range (MHz) | 791-821MHz |
| Band Width (MHz) | 30MHz |
| Output Power@(25ºC) | 43±1dBm |
| Gain | 50±1dB |
| Gain Adjustable rang | ≥20dB |
| Step of Gain Adjustable | ≤1dB |
| Error of Gain Adjustable | Total error ≤ ±1.5dB |
| ACPR | ≤-40dBc |
| In Band Ripple | ≤1.5dB |
| VSWR | ≤1.5 |
| Out of Band Spurious | 9kHz~1GHz:≤-36dBm/30kHz 1GHz~12.75GHz:≤30dBm/30KHz |
| EVM | ≤3% |
| RX | Technical Parameters |
| Frequency range (MHz) | 832-862MHz |
| Gain | 25±2dB |
| Gain Adjustable rang | ≥20dB |
| Step of Gain Adjustable | ≤1dB |
| Error of Gain Adjustable | Total error ≤ ±1.5dB |
| In Band Ripple | ≤1.5dB |
| Noise figure | ≤1.8dB |
| VSWR | ≤1.5 |
| Max. Input (no damage) | 0dBm |
| OTHER SPECS | Technical Parameters |
| Power Supply | +28V; ≤3.5A |
| Storage Temperature | -25~+65ºC |
| Humidity | 5%~95% |
| Operating Temperature | -25~+55ºC |
- POWER-6 Port for Power Supply & Monitor:
PIN 2 -------- RS485B;
PIN 3,4 -------- GND
PIN 5 -------- NC;
PIN 6 -------- DC+28V.
- RF Connectors:
5 Connectors of MCX for PA IN & LNA OUT&LNA IN
Monitoring for downlink PA and uplink LNA with Baud rate9600.
- LNA Monitoring Part. Setup module address(default=0), Setup LNA Enable, ATT.
- PA Monitoring Part . Setup module address(default=0), on/off, ATT, ALC. Query function: Working status(Overpower, Overtemperature, VSWR, ATT), Alarm (over Temperature, over power, VSWR, PA Fault);
- Over Temperature Alarm:Alarm threshold +85ºC, meanwhile switch off PA, When Temperature lower to +65ºC, switch on PA automatically.
- Over power alarm: when output power >Po+2dB
- PA Revers Power detection: Detect total power, Modulated signal test detection rang >20dBm, Detection accuracy<±2dBm;
- Amplifier temperature detection: Temperature detection rang including but not limited 0ºC~+85ºC, Detection accuracy<±3ºC;
- VSWR detection: detection rang including but not limited 1.4~3.0. Detection accuracy: 1.3~1.7@ Load's VSWR=1.5; / 1.5~2.51.3~1.7@ Load's VSWR=2.0;
- PA Forward Power detection: Detect total power, Modulated signal test, detection rang >20dBm, Detection accuracy<±2dBm;
Dimensions: 130*110*21mm
