PTFE Rotary Shaft Seals
PTFE or Per Your Request
Machine
Shaft Seal
Temperature
O-Ring
Standard, Nonstandard
Red, Black, White, Clear, etc
Usual 7 Days After Confirmation of The Sample or a
Welcome
ISO 9001:2008
Walle PTFE Rotary Shaft Seals
Carton
per your request
Guangdong, China
4016931000
Product Description
Elringklinger HN 2390 Rotary Shaft Seals
HN 2390
Thanks to its high wear and pressure resistance, this standard design is suitable for a wide range of applications, such as pumps, blowers, and compressors.
Properties
Good sealing performance with pressurized media
Suitable for dry runs and lubricated applications
Also suitable for soft shafts
Operating limits
Max. circumferential speed: 20 m/s
Temperature range: -60°C to +200°C
Max. pressure: 10 bar
Vacuum: to 10-3 mbar
Center offset: ≤ 0.1 mm
Concentricity tolerance: ≤ 0.05 mm
Designation example: rotary shaft seal with PTFE sealing lip for shaft diameter d1 = 75, locating hole d2 = 100 and width w = 10:
RWDR HN 2390 75 x 100 x 10
Elringklinger HN 2390 Rotary Shaft Seals Properties:
Suitable for unhardened shafts as well
Suitable for high peripheral speeds
Low generation of frictional heat
Suitable for small assembly spaces
Long service life
Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.
Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.
We have the highest quality and lowest costs in the industry delivered on time.
Any questions for PTFE Rotary Shaft Seals, please do not hesitate to contact me. It is our pleasure to be on service of you!
HN 2390
Thanks to its high wear and pressure resistance, this standard design is suitable for a wide range of applications, such as pumps, blowers, and compressors.
Properties
Good sealing performance with pressurized media
Suitable for dry runs and lubricated applications
Also suitable for soft shafts
Operating limits
Max. circumferential speed: 20 m/s
Temperature range: -60°C to +200°C
Max. pressure: 10 bar
Vacuum: to 10-3 mbar
Center offset: ≤ 0.1 mm
Concentricity tolerance: ≤ 0.05 mm
Designation example: rotary shaft seal with PTFE sealing lip for shaft diameter d1 = 75, locating hole d2 = 100 and width w = 10:
RWDR HN 2390 75 x 100 x 10
Elringklinger HN 2390 Rotary Shaft Seals Properties:
Suitable for unhardened shafts as well
Suitable for high peripheral speeds
Low generation of frictional heat
Suitable for small assembly spaces
Long service life
Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.
Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.
We have the highest quality and lowest costs in the industry delivered on time.
Any questions for PTFE Rotary Shaft Seals, please do not hesitate to contact me. It is our pleasure to be on service of you!
