Electrogas Welder/Vertical up Electric Gas Welding Machine

Description:
EGW gas electric welding machine is a high efficiency automatic welding equipment based on the current feedback to the closed-loop control of the car. Single pass forced water cooling main characteristics of a molding thickness of 10mm~50mm. At the same time, the liquid level of the molten pool is automatically controlled, the welding wire stretch out length is automatically adjusted, the car is small in size, light in weight, easy to be updated, flexible and convenient to use. Equipped with an optional fixed way, including permanent magnet adsorption, electro magnet adsorption, vacuum sucker adsorption, switch permanent magnet adsorption and other fixed methods, convenient assembly and disassembly. Widely used in oil, chemical industry, blast furnace and shipbuilding and other industries of thick plate welding.
Main Parts
A) The main frame is mainly composed of transverse welding operation and welding steel structure
Suit upside-down tank build
Suit min dia5.0m
Suit board 1.5m~2.5m

B) EGW crawling trolley and rail
The import of worm with imported Japanese Sanyo crawler drive motor;
For the welding torch adjusting device;
The front of slide fastening device
The front of the slider about adjusting device;

C) EGW welding control box
The operation of the control box is Nanjing lercoln welding EGW, designed for EGW heavy gas electric welding car design and production controller. With remote real-time welding current and voltage display function; car lights; current and voltage regulation function of remote real-time welding; stem elongation adjusting function; distal cold wire, arc and arc extinguishing function; automatic closed-loop control of walking function of car and spare manual control; walking function.
It can meet all requirements of EGW-3G gas welding process, it is the crystallization of complex automation control system and simple field operation requirement.

D) Linear welding oscillator
The welding line swing controller matched with the EGW welding operation control box is supplied by the welding operation control box without additional power supply. With the swing speed, swing amplitude, before / after the stop time to adjust the function of real-time. At the same time can be automatic, convenient clamping and welding torch.
When matched with the EGW welding operation control box is connected into an integral operation interface, which is connected by the aviation plug, the signal is stable, and the transportation is reliable; and the utility model can be used separately.


E) WELDING POWER
    LINCOLN DC-600
    WIRE FEEDER

SEAMER