EV07E2Q-H
Product Description
Cable Introduction
A vehicle charging and discharging warning control system used for electric vehicle charging stations and charging ports, or with control signal transmission functions for charging saturation, safety warning, and other aspects.
Cable characteristics
Temperature level- 40 ºC -+50 ºC, with a maximum line temperature of 90 ºC;
Rated voltage: AC 450/750V, DC 1000V;
The allowable temperature for reference short circuit can reach 250 ºC for 5 seconds;
Insulation uses thermoplastic elastomer materials that do not contain halogens, while sheath uses thermoplastic polyurethane materials that do not contain halogens, and follows the development direction of environmentally friendly products; Cold resistant, wear-resistant, oil resistant, acid alkali resistant, water-resistant, UV resistant;
Good EMI and EMC resistance to electromagnetic interference;
Resistance to external load pressure and thermal stress;
Through a single vertical combustion test (2PfG 1908), it has high flame retardancy.
Product advantages
Excellent resistance to external load pressure and thermal stress: passed 2PfG 1908 vehicle pressure test, high temperature pressure test, and crack resistance test;
Super strong mechanical strength, with a sheath tensile strength of up to 25Mpa, passed 2PfG1908 whole line mechanical testing;
Good oil resistance (resistant to mineral oil, fuel, gasoline);
Extremely strong resistance to use environment: passed the 2PfG 1908 UV resistance test;
Excellent low-temperature toughness: passed 2PfG 1908-50 ºC low-temperature bending test, -50 ºC cold extension test, -10 ºC cold impact test.
Cable material
Conductor: Tin plated or non tin plated flexible copper wire (IEC 60228 Class 6 conductor)
Insulation: 90 ºC environmentally friendly thermoplastic elastomer TPE
Sheath: 90 ºC environmentally friendly thermoplastic polyurethane TPU.
A vehicle charging and discharging warning control system used for electric vehicle charging stations and charging ports, or with control signal transmission functions for charging saturation, safety warning, and other aspects.
Cable characteristics
Temperature level- 40 ºC -+50 ºC, with a maximum line temperature of 90 ºC;
Rated voltage: AC 450/750V, DC 1000V;
The allowable temperature for reference short circuit can reach 250 ºC for 5 seconds;
Insulation uses thermoplastic elastomer materials that do not contain halogens, while sheath uses thermoplastic polyurethane materials that do not contain halogens, and follows the development direction of environmentally friendly products; Cold resistant, wear-resistant, oil resistant, acid alkali resistant, water-resistant, UV resistant;
Good EMI and EMC resistance to electromagnetic interference;
Resistance to external load pressure and thermal stress;
Through a single vertical combustion test (2PfG 1908), it has high flame retardancy.
Product advantages
Excellent resistance to external load pressure and thermal stress: passed 2PfG 1908 vehicle pressure test, high temperature pressure test, and crack resistance test;
Super strong mechanical strength, with a sheath tensile strength of up to 25Mpa, passed 2PfG1908 whole line mechanical testing;
Good oil resistance (resistant to mineral oil, fuel, gasoline);
Extremely strong resistance to use environment: passed the 2PfG 1908 UV resistance test;
Excellent low-temperature toughness: passed 2PfG 1908-50 ºC low-temperature bending test, -50 ºC cold extension test, -10 ºC cold impact test.
Cable material
Conductor: Tin plated or non tin plated flexible copper wire (IEC 60228 Class 6 conductor)
Insulation: 90 ºC environmentally friendly thermoplastic elastomer TPE
Sheath: 90 ºC environmentally friendly thermoplastic polyurethane TPU.
