GDHm125A
50-80m
50-100 L/min
Motor
Cast Iron
Single-stage Pump
Booster Pump
Electric
Electric Pump
Blade Pump
Clarified Water Pump
Clean Water Pump
Clean Water
Automatic Pump
Vortex Pump
45#/304# Stainliss Steel
Brass/Stainless Steel/PPO
OEM
Cold Silicon Rolling Sheet
NBR/Ceramic/Carbon
B/F
IP44
Silicon Steel Sheet Cold Rolling
Silicon Steel Sheet Cold Rolling
GORDON
Foam+Carton+Pallet
Jet Pump
Fu'an China
8413709990
Product Description
Domestic Electric Automatic Pump with Pressure Tank for Hot Water
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> Stainless steel shaft or 45# carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>> The flow priority system, electric pump use acme, turely achieve the full pressure.
Application
GDHm Automatic Self-priming Pump
Production Work-flow Chart of Pump
About us
FAQ
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> Stainless steel shaft or 45# carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>> The flow priority system, electric pump use acme, turely achieve the full pressure.
Application
Technical Data
| Model | HP | W | Current (A) | Capacitor (uf) | H.Max (M) | Q.Max (L/min) | Pipe Size | Pressure Set (bar) | Tank (L) |
| GDHm-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
| GDHm-250A | 0.35 | 250 | 3.5 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
| GDHm-370A | 0.5 | 370 | 4.5 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
| GDHm-550A | 0.75 | 550 | 2.9 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
| GDHm-750A | 1 | 750 | 3.5 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
| GDHm-1100A | 1.5 | 1100 | 4.5 | 25 | 62 | 66 | 1"X1" | 3.2 | 2 |
GDHm Automatic Self-priming Pump
| Item | Description | Item | Description | Item | Description | Item | Description |
| 11 | Press Sensor | 21 | Bearing | 31 | Screw | 41 | O-ring |
| 12 | Screw | 22 | Shaft Key | 32 | Cable Plug | 42 | Pressure Tank |
| 13 | Inlet Rubber | 23 | Rator | 33 | Cable Net | 43 | Pressure Sensor |
| 14 | Stainless steel Inlet | 24 | Bearing | 34 | Screw | 44 | Cover |
| 15 | O-ring | 25 | Stator | 35 | PC Clip | 45 | Plastic Base |
| 16 | Screw | 26 | Motor House | 36 | Volatede Regulator | 46 | Screw |
| 17 | O-ring | 27 | Terminal Box | 37 | O-ring | ||
| 18 | Screw | 28 | Screw | 38 | Fan | ||
| 19 | Front Plate | 29 | Capacitor | 39 | Screw | ||
| 20 | Screw | 30 | Terminal Box | 40 | Fan Cover |
Production Work-flow Chart of Pump
About us
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
