• Overview
  • Details
  • More
Share Products Categories Channel Cart

1/6
D3 3CH Class D Active Transistor Amplifier Plate Module with DSP for Professional Speaker图1D3 3CH Class D Active Transistor Amplifier Plate Module with DSP for Professional Speaker图2D3 3CH Class D Active Transistor Amplifier Plate Module with DSP for Professional Speaker图3D3 3CH Class D Active Transistor Amplifier Plate Module with DSP for Professional Speaker图4D3 3CH Class D Active Transistor Amplifier Plate Module with DSP for Professional Speaker图5D3 3CH Class D Active Transistor Amplifier Plate Module with DSP for Professional Speaker图6

D3 3CH Class D Active Transistor Amplifier Plate Module with DSP for Professional Speaker

Price $400.00
Min Order 1 Piece  
Shipping from Guangdong, China
Quantity
-+
Product details
D3
Professional Amplifier
AV, KTV System, Stage
Professional
Transistor Amplifier
Post Amplifier, Amplifier Combined, Pre-amplifier
3.1
3
110V-220V
Push-Pull Amplifier
D
Guangdong China
D
3
USB and RS-485
90V-135V / 180V-265V
Gain, Delay, Mute, Polarity, Mixer, EQ, X-Over
312×190×120mm
4.9kg
Sanway Audio
Double Durable Cartons
CE
Guangdong China
8518400090
Product Description

D3 1800W+900W+900W Class D 3CH DSP Active Amplifier Module



Overview 

 
D3 is a professional 3 channel class D active power amplifier module with DSP.
Its installation is 312mm x 190mm X 120mm .
8Ω  Power --   L:1500W + M:500W + H:500W
 4Ω  Power --   L:1800W + M:700W + H:700W
 
Specifications 

ITEMD3
 8Ω  PowerL:1500W + M:500W + H:500W
 4Ω  PowerL:1800W + M:700W + H:700W
Frequency Response20Hz-20KHz ±1dB
THD+N 1KHz 1W 8Ω<0.1%
Signal to Noise Ratio  1KHz>100dB
Channel Separation  1KHz>80dB
ClassD
ProtectionShort,DCP,OVP,UVP,OCP,OTP
Operating Voltage90V-135V / 180V-265V
Input Sensitivity0.77V
Input Impedance20KΩ
DSP FuctionMUTE,Polarity,Gain,Delay,
Limiter,Mixer,EQ,XOver
DSP ControlUSB and RS-485
Dimensions(W×H×D)312×190×120mm
Packing Dimension350×210×150mm
Net Weight(kg)4.9
Gross Weight(kg)

5.9

 

Important Note
 
ATTENTION: This unit must be protected from damp because of the risk of fire and the
possibility of electric shocks
1. Make sure that you have the correct mains voltage. Only operate the unit at the mains
voltage marked on the rear panel.
2. Make sure that nothing especially no metal objects are inserted into the device. This
could result in electric shock or malfunction.
3. If the unit is subjected to extreme fluctuations of temperature e.g. On being transported
from outside into a heated room, condensation can form. This unit should n ot be used untill
it has reached room temperature.
4. In the event of water or any other fluid being accidentally spilt on the unit switch the
unit off immediately and send it to a qualified service workshop for inspection.
5. Make sure that the unit is always well ventilated and never exposed to direct sunlight
6. Do not use sprays to clean the unit as they have a detrimental effect on the unit and could
ignite suddenly.
7. The machine use single power switch, please cut off the power before fix.
8. Please do not put the cup, vessel of flower or container above the machine, in case the
leak out water then cause the leakage current off the machine.

 

 






Company Home Page: https://cnsanway.en.made-in-china.com/
Facebook Home Page: https://cnsanway.en.made-in-china.com/

Buyer review
Loading review details...
Contact

Sanway Audio Equipment Co., Ltd.

Audited Supplier18 Years
ProfileCertified by SGS/BV

Message Type

* Content

* Name

* Phone

* Email

* Captcha

captcha

Recommended for you