Cylindrical Roller Bearing High Speed Wear-Resistant Machine Rn606m Rn606/Ya Rn606/S0

Cylindrical roller bearings are designed with a straightforward structure that consists of cylindrical rollers in contact with linear raceways. One of the key features of cylindrical roller bearings is their high load capacity, especially under mainly radial loads. The roller and ring ribs offer low friction, making these bearings suitable for high-speed rotation
N type:
The inner ring has two integral flanges and the outer ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself. The bearings are therefore used as non-locating bearings.
NU type:
The outer ring of bearings of the NU design has two integral flanges and the inner ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself.
NJ type:
The outer ring has two integral flanges and the inner ring one integral flange. The bearings are therefore suitable for the axial location of a shaft in one direction.
NUP type:
The outer ring has two integral flanges and the inner ring one integral flange and one non-integral flange in the form of a loose flange ring. The bearings can be used as locating bearings, i.e. they can provide axial location for a shaft in both directions.
RN type:
No outer ring and the inner ring two integral flanges.

Features:
Excellent Sealing
The potential entry of water and foreign matter is a common concern for many bearings. However, with the use of contact seals, this issue is significantly reduced. By minimizing the risk of contamination, the bearings benefit from a longer lifespan and enhanced durability.

Crane sheaves are often subject to significant radial and thrust loads, which can lead to premature wear and tear if the bearings are not up to the task. Fortunately, these bearings are specifically designed to handle these high demands without any loss of performance.

 

 

Bearing Designation		Boundary Diensions(MM)			Weight(kg)
New Standard	Old Standard	d	D	B
RN202TN1	502202A	15	30	11	0
RN203M	502203H	17	33.9	12	0.055
RN203	502203	17	33.9	12	0.036
RN304M	502304H	20	44.5	15	0.07
RN304EM	502304EH	20	45.5	15	0
RN204EM	502204EH	20	40	14	0
RN305EM	502305EH	25	54	17	0
RN205EM	502205EH	25	46.5	15	0
RN206	502206	30	53.5	16	0.11
RN206M	502206H	30	53.5	16	0.11
RN206F1	-	30	53.5	16	0.11
RN606M/YA	502706KH	30	60	28	0.34
RN606M	502706H	30	60	26	0.336
RN606/YA	502806	30	68	26	0.507
RN606/S0	502706T	30	60	26	0.357
RN606	502706	30	60	26	0.357
RN306EM	502306EH	30	62.5	19	0
RN2306M	502606H	30	62	27	0.34
RN2206	502506	30	54	20	0.203
RN206F1	502206W	30	53.5	16	0.144
RN206EM	502206EH	30	55.5	16	0
RN307M	502307H	35	68.2	21	0.32
RN607M	502707H	35	60	26	0.29
RN607E/YA	502807E	35	65	21	0.364
RN307EM	502307EH	35	70.2	21	0
RN307EF1	502307EW1	35	70.2	21	0.337
RN207EM	502207EH	35	64	17	0
RN207EF1	502207EW1	35	64	17	0.25
RN308EM	502308EH	40	80	23	0
RN2208E/P6	E502508E	40	74	23	0.361
RN208EM	502208EH	40	70	18	0
RN309	502309	45	86.5	25	0.613
RN309M	502309H	45	86.5	25	0.61
RN309EM	502309EH	45	88.5	25	0
RN209EM	502209EH	45	76.5	19	0
RN310EM	502310EH	50	97	27	0
RN310E	502310E	50	95	27	0.797
RN210M	502210H	50	80.4	20	0.382
RN210EM	502210EH	50	81.5	20	0
RN311EM	502311EH	55	106.5	29	0
RN211M	502211H	55	88.5	21	0.337
RN211EM	502211EH	55	90	21	0
RN612/YA2	542412	60	127	28.5	1.87
RN312EM	502312EH	60	115	31	0
RN312E	502312E	60	115	31	0
RN212M	502212H	60	97.5	22	0.592
RN212EM	502212EH	60	100	22	0
RN313EM	502313EH	65	124.5	33	0
RN313E	502313E	65	124.5	33	0
RN313	502313	65	121.5	33	1.296
RN213M	502213H	65	105.6	23	0.741
RN213EM	502213EH	65	108.5	23	0
RN614Q2/HNP6	E502714NQ1	70	88.5	16	0.239
RN314M	502314H	70	130	35	1.9
RN314EM	502314EH	70	133	35	0
RN314EF1	502314W1E	70	133	35	1.9
RN314	502314	70	130	35	1.578
RN214EM	502214EH	70	113.5	24	0
RN315M	502315H	75	139.5	37	2.453
RN315EM	502315EH	75	143	37	0
RN215M	502215H	75	116.5	25	0.728
RN215EM	502215EH	75	118.5	25	0
RN316M	502316H	80	147	39	2.12
RN316EM	502316EH	80	170	39	0
RN2216	502516	80	125.3	33	1.65
RN216M	502216H	80	125.3	26	1.123
RN216EM	502216EH	80	127.3	26	0
RN317M	502317H	85	156	41	3.173
RN317EM	502317EH	85	160	41	0
RN317	502317	85	156	41	2.621
RN217M	502217H	85	133.8	28	1.091
RN217EM	502217EH	85	136.5	28	0
RN318M	502318H	90	165	43	3.04
RN318EM	502318EH	90	169.5	43	0
RN218EM	502218EH	90	145	30	0
RN218	502218	90	143	30	1.69
RN319M	502319H	95	173.5	45	3.222
RN319EM	502319EH	95	177.5	45	0
RN219EM	502219EH	95	154.5	32	0
RN219	502219	95	151.5	32	2.18
RN320M	502320H	100	185.5	47	0
RN320EM	502320EH	100	191.5	47	0
RN220M	502220H	100	160	34	2.298
RN220EM	502220EH	100	163	36	0
RN321M	502321H	105	195	49	0
RN321EM	502321EH	105	195	49	0
RN221M	502221H	105	168.8	36	2.28
RN221EM	502221EH	105	173	36	0
RN221/S0	502221T	105	168.8	36	2.76
RN322M	502322H	110	207	50	0
RN322EM	502322EH	110	207	50	0
RN222EM	502222EH	110	180.5	38	0
RN222E	502222E	110	180.5	38	3.3
RN222	502222	110	178.5	38	0
RN624/YA2	542424	120	260	58.5	15.9
RN324M	502324H	120	226	55	0
RN324EM	502324EH	120	226	55	0
RN224M	502224H	120	191.5	40	4.11
RN1024/P6	E502124	120	165	28	1.79
RN326M	502326H	130	243	58	0
RN226EM	502226EH	130	204	40	0
RN628/YA2	542428	140	304	68	25.2
RN230EM	502230EH	150	238	45	0
RN332M	502332H	160	292	68	0
RN232M	502232H	160	255	48	0
RN232EM	502232EH	160	225	48	0
RN334M	502334H	170	310	72	0
RN336M	502336H	180	328	75	25.9
RN236M	502236H	180	282	52	0

 

 

Application Industry

Applications:
Full-complement cylindrical roller bearings come without cages to allow for maximum roller capacity, which significantly increases their load capacity. However, their high-speed performance is slightly lower than that of bearings with cages. These CRBs are mainly used in applications that require handling of heavy loads at low speeds.

Playground Equipment

Slewing bearing can provide excellent performance experience and safety guarantee for amusement equipment, and the durability of slewing bearing is also the main concern of technical engineers. For more than 20 years, slewing bearing solutions have been used in many key applications of large amusement equipment. reflect.

We designed the cross-sectional area to remain the same as the raceway center distance increased, and the slewing ring achieves better dynamic capabilities with less mass.

Key advantages include:
* Lighter weight
* Save spaighter weightce
* Long life and lower maintenance costs
* Better stiffness
* Better lubrication in extreme conditions

Medical Device
With the comprehensive development of scientific and technological strength, the social economyu has been improved faster, and the medical equipment has also been comprehensively improved.

Mining & construction machinery

Mining machinery and heavy construction machinery industry uses a range of different types of highly specialized mobile machinery. . The places where mining machinery and construction machinery are active are mostly mining sites such as mountains and deserts that are far away from ordinary human life. These heavy machinery work in the harshest environments and require continuous low-friction work without reducing load capacity and minimum. assembly and adjustment time. Solving the bearing heating problem caused by the large exciting force, high vibration frequency and continuous operation of vibratory rollers for users has become the focus of the work. Mineral crushing machinery, cutting machinery, screening machinery, loading machinery, conveying machinery and other equipment in the use environment of bearings, users desire products with robustness, durability and high reliability to resist these harsh working conditions.

Transportation vehicle

Metric and inch needle roller bearings have various structural types, mainly including open drawn cup needle roller bearings, closed drawn cup needle roller bearings, needle roller bearings with inner ring and needle roller bearings without inner ring/without inner ring Cage needle roller bearings, caged and cageless needle roller bearings. Widely used in automobiles, motorcycles, mopeds, power tools, textiles, agricultural machinery, printing machinery, construction machinery, automatic instruments and other fields.

Automatic machinery

Industrial robot bearings mainly include two categories: one is thin-walled bearings, and the other is crossed cylindrical roller bearings. In addition, there are harmonic reducer bearings, linear roller bearings, spherical plain bearings, etc. Bearings with good performance have large bearing capacity, good rigidity, high rotation precision and easy installation.

 

Shandong AWX bearing Co., ltd. is a professional manufacturer of bearings, We can design and manufacture single-row ball slewing bearings, double-row ball slewing bearings, three-row roller slewing bearings, ball combination slewing bearings, crossed roller bearings, crossed tapered roller bearings Bearings, slewing drives and custom bearings and so on.

Our factories used high-quality chrome steel and stainless steel as raw materials, specializing in the design, development and manufacture of deep groove ball bearings, stainless steel bearings, stainless steel outer ball bearings , tapered bearings , cylindrical bearings, needle bearing , thrust bearing , bearing housing and non-standard bearings.

Adhering to the business philosophy of "Quality and Integrity", we will continue to provide excellent bearings and high-quality services to serve global customers.

Q:What's your after-sales service and warranty?
A: We promise to bear the following responsibilities when defective products were found:
1. Replacements would be sent with goods of your next order;
2. Refund for defective products if customers require.

Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.

Q:What's the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

Q:How long is the lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.

Q:Do you offer free samples? 
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users. 

Q:How to place order?
A: 1. Email us the model, brand and quantity,shipping way of bearings and we will quote our best price for you; 
2. Proforma Invoice made and sent to you as the price agreed by both parts; 
3. Deposit Payment after confirming the PI and we arrange production; 
4. Balance paid before shipment or after copy of Bill of Loading.