MBH-ETFER-055
Hard Plastic Rods
＜0.01%
0.4%~1.4%
81~130MPa
Nature Beige
Max 260mm Dia. Per Customized
Yes
High Performance
Yes
Medical / E/E / Semiconductor / Aerospace etc
MBH
as Per Customer's Request
as per customer's request
China
3926909090
Product Description
ETFE (ethylene tetrafluoroethylene) commonly referred to as Tefzel® is a modified copolymer of ethylene and tetrafluoroethylene. It has medium stiffness, which makes it suitable for applications such as chemical tank linings that require weldability and the ability to conform to curved metal or FRP surfaces. ETFE is often used in applications that demand mechanical toughness, moderate stiffness, and outstanding chemical resistance.
PCTFE Main Advantage:
Main Advantage:
PCTFE Main Advantage:
- Especially suitable for cryogenic applications
- Excellent resistance to creep
- Dimensionally stable over a wide temperature range
- Extremely low gas permeability
- FDA approval
- Transparent and coloured compounds
- Working temperature from -240°C to +180˚C
Main Advantage:
- Chemically inert to a wide range of industrial chemicals and solvents
- Exceptional dielectric insulation properties
- Rugged, good abrasion resistance, and impact strength
- May be welded with hot air welding equipment
- High resistance to outdoor weathering
- Radiation and heat sterilization resistant
- ETFE TYPICAL PROPERTIES
| Marbarm ETFE | |||
| ITEM | UNIT | TEST METHOD | TEST Value |
| Melting point | ºC | D-3159 | 245~255 |
| Proportion | g/cm³ | HG/T 2904-1997 | 1.70~1.75 |
| Rockwell hardness | HB | D-2240 | 61~70 |
| Tensile Strength(23ºC) | Mpa | HG/T 2904-1997 | 30~50 |
| Elongation at break(23ºC) | % | HG/T 2904-1997 | 300~450 |
| Notched Impact Strength(23ºC) | Ft-lb/in | HG/T 2904 1997 | No Break |
| water absorption | % | HG/T 2902-1997 | ≤0.03 |
| Oxygen Index | % | GB/ T 2406-93 | 30~40 |
| Flammability | Level | GB/T 2408-2008 | V-0 |
| Dielectric constant | / | HG/T 2904-1997 | ≤2.4 |
| Dielectric dissipation factor | / | HG/T 2904-1997 | 0.008 |
| Puncture voltage resistance(0.2mm) | KV | ASTM D149 | Over 7.SKV |
| GTT(glass-transition temperature) | ºC | DMA | 80~120 |
| Service temperature | ºC | UL-746 | -50~150 |
| Material | Brand | Size (Rod) | Services | Application |
| ETFE | MBH | Dia. 4 /5/6/7/8/9/10/13/16/18/22/ 25/26/40/45/50/55/ | sheet/rod extrusion and machining and plastic modified services | medical, pharmaceutical, and semi-conductor, Aerospace, Auto etc. |
