HMR
Fixed Resistor
Shunt Resistor
DIP Resistor
Constant Copper Wire Resistor
Throught Hole
Fuse Resistor
Single Connection
U Type
Linear Scale
Radio
Kyx
-55ºC~+125ºC
3mΩ
1% 5% 10%
0.5, 0.6, 0.8, 1.0, 1.5, 2.0mm
KYX
Carton
1.2*10mm
Shenzhen
8516800000
Product Description
Flame resistant
Inductance less than 10 nanohenry
Solderable copper lead
In some electronic measuring instruments, devices or products, there is often a need to measure the DC current in the circuit, so researchers have developed a variety of current sensing integrated circuits. It is an I/V converter that converts the measured current into a corresponding voltage, V = kI, where k is the proportionality constant. In addition, in some electronic products, the output current should be limited to prevent overcurrent caused by faults (partial short circuit of the load or short circuit of the output terminal, increase of the output voltage of the power supply, etc.) and cause greater loss. When an overcurrent condition is detected, it can be controlled to turn off the power or load switch, or to output with a limited current.
