TJ550A
550mm
400kw/1000rpm
1-8 Rpm
22 mm 0.2 mm
<170n/ mm2
400mm2~6000mm2
280 mm (or 90mm Rod)
2300kg/H
2000~2500mm
AC 380 V, 3 Phase, 50 Hz,
0.7MPa, 2m3/Min
>0.3MPa, 100m3/H
45m X 10m
1,2,3,Each One
Tj550A
Senerge
Standard Packing
45m X 10m
Zhejiang
Product Description
TJ550A Continuous Extrusion Machinery
Specifications
a. Specification of TJ550A Machinery:
Wheel Diameter: 550mm
Main Motor: 400KW/1000rpm
Rotation Speed: 1-8 rpm
b. Feedstock
Material: Clean of up casting copper rod
Rod Diameter: 22 mm± 0.2 mm
Tensile strength <170N/ mm2
c. Product
Maximum Cross Sectional Area: 400mm2~6000mm2
Maximum Width: 280 mm (or 90mm rod)
Output:(average) 2300Kg/h
Flash level: (depending on section area and normal tooling) 3-6%
Spooler Flange: 2000~2500mm
d. Plant Requirement
Power Supply: AC 380 V, 3 Phase, 50 Hz, 550KVA
Compression Air: 0.7MPa, 2m3/min
Loop Cooling Water: >0.3MPa, 100m3/h
Space: 45m X 10m
The structure of the machine is the grooved wheel and shaft assembly. The main shaft is driven by an infinitely variable, thyristor-controlled DC electric motor, via an epicyclical gearbox. The power output envelope from the drive is matched to the production rates specified by operator. There are mount roller bearings that incorporate multiple seals to retain oil and prevent the ingress of foreign material.
The Coining roll assembly to coin the feed rod firmly in the wheel groove.
The shoe contains the die-chamber assembly can be opened and closed easily by hydraulic cylinder, high pressure cylinder used to support the shoe in working position. With supplement tooling, the extrusion wheel of the machine can be replaced easily. Exchange chamber and die is also very fast.
