CTC-95 transposed conductor production line is special for CTC used in transformer windings less than 1000kVA and 1000KV. This machine can curve small side of the flat wire via accurate mechanical actions of transposing device and transpose each other repeatedly; Then combine together and taped with insulation papers and recoiled.
Characteristics
1) Can be 24-96 pay off wires; Super long pay-off distance, max. pay-off angle <16°
2) 8-10°compulsive planning device with tension fine adjusting
3) Constant-pressure double-pushing transposing action, transposing distance 22-35mm, gapless adjustment, transposing frequency max. 120 times per minute
4) Complementary tension type paper taping, lapping ratio arbitrarily preset between 40-70%
5) Double-station caterpillar type towing device, towing force is displayed and adjusted
6) AC servo plus inverter drive, PLC control, high precision synchronized controlling transmission of each part, recording and self-rectifying, long-distance diagnosing.
Specifications
| Item | Data | Unit |
| Quantity of flat wires | 7-95 | pcs |
| Single wire side | A: 1.12-2.85; B: 3.15 - 13 | mm |
| Max. dimension of finished CTC | 28x90 | mm |
| Speed of stranding cage (stepless) | 1-10 | rpm |
| Towing speed (stepless) | 1-10 | m/min |
| Transposing pitch (stepless) | 50-250 | mm |
| Taping speed (stepless) | 50-450 | rpm |
| Taping pitch (stepless) | 50-100 | mm |
| Max. taping layers | 8 x n | layers |
| Width of insulation paper | 14-35 | mm |
| Transposing direction | Right | |
| Main motor power | 18-55 | kW |
| Wire disk size in cage | PN400-PN500 | |
| Take-up disk size | PN800-PN2000 | |
| Take-up motor power | 7.5 | kW |
| Dimension of the line | (38000-58000) x 5200 x 4200 | mm |
| Weight | 38-61 | Ton |
| Total power | 60-113 | kW |
