Feature
• Ultra high level of polishing, use 0.3um, the outer wall is 0.4um, absolute health level and polishing.
• Using strong fast loading, the highest pressure of 0.6 Mpa, 1.0 Mpa.
• Low exhaust valve and drain valve: threaded joint sets and pagoda from, when deflated and drainage, with the connect lose won't turn.
• Low filter supporting feet by strengthening thread, not easy sliding teeth, more durable; Can be installed adjusting nut at the bottom of the feet, can adjust the height of the filter, easy to use.
Application
• Low the pharmaceutical industry: all kinds of antibiotics such as liquid prefiltering.
• Low food and beverage, wine, mineral water, drinking water filtration.
• Low oil industry, oil field water injection filter.
• Low electronic industry: high pure water prefiltering.
• Low chemical industry: all kinds of organic solvents, acid, alkalil liquor filtration.
| Operating Conditions | |
| Max. operating pressure | 0.6MPa 1.0MPa |
| Max. operating temperture | 150ºC |
| Disinfect | Online or steam sterilization: 121ºC/30min |
| Material | |
| Shell | 304, 316L |
| Eyebolt | 304 |
| Stabilizer blade | 304 |
| O-ring | EPDM, PTFE Viton, Silicone |
| Connection | |
| Connection of shell | Tri-clamp |
| N1, N2 In- outlet | Tri-clamp |
| N3 Pressure gauge(option) |
1.5″Tri-clamp
|
| N4vent valve(option) | M6 Thread |
| N5 Drain valve (option) | M6 Thread |
| Cartridges connection | 222 type, 226 type |
| Surface Finish | |
| Finish type | Mechanical / electrolytic polishing, sand blasting |
| Polishing precision | 0.3um Inner surface Ra≤0.3um |
Dimension Parameters
| 1Pc | |||
| 10″ | 10″ | 10″ | |
| A: Total height | 625 | 625 | 625 |
| B: The distance from inlet to center | 110 | ||
| C: Shell diameter | Φ101.6 | ||
| D: N1, N2 The height from in-outlet to ground | 170 | ||
| In-outlet N1, N2 Size | 1″ | ||
The above-mentioned data is the standard, it can customize according tocustomer's requirements.
| Qty. of Bag Filter | Model of Bag Filter | Cartridges connection | Shell Material | In-outlet connection | O-ring |
| 1R | 20 | S | 4 | K | E |
| 1R=1Pc | 10=10″Cartridge | S=226Type | 4-304 | K=Tri-clamp | E=EPDM |
| 20=20″Cartridge | T=222Type | 6=316L | P=PTFE | ||
| 30=30″Cartridge | V=Viton | ||||
| 40=40″Cartridge | S=Silicone |
Q: CAN I HAVE SAMPLES TO TEST?
A: Yes, we are pleased to supply samples to test and check quality, miled sample order is available. Please note, free samples is not acceptable.
Q: DO YOU HAVE ANY MOQ LIMITED?
A: Our MOQ is 1PC to supply new customers.
Q: WHAT'S THE LEAD TIME?
A: Sample: 20-25days. Mass production: 25-30days depend on the order quantity.
Q: HOW DO YOU SHIP THE GOODS AND HOW LONG DOES IT TAKE?
A: We ususlly ship by sea. DHL, UPS, fedex TNT are also acceptable.
