XMTA-908T
Customized
CE
Cj
LED
96*96
Digital
Temperature Controller
Electronic Type
CJ
1PCS/Box
ISO 9001: 2008 Others
China
9032900090
Product Description
Product Description
Specifications
Temperature controller
PID
intelligence dual row 4-LED displays
displaying the measured value and set value.
Main technical specification
1. Measurement deviation: ≤ ± 0.5%F. S± 1B
2. Cold end compensating deviation: ≤ ± 2.0C
3. Sampling cycle: 0.5S
4. Control cycle: Relay output 2-120S, other is 2S.
5. Relay output contact capacity: AC220V/5A (resistance load) or AC220V/0.3A
(perceptual
Load)
6. Driving controllable pulse output: ≥ 3V scope, ≥ 40us width's over zero or trigger contact
pulse
7. Driving solid relay signal output: Driving electric current≥ 15mA, voltage≥ 9V.
8. Continuous PID: 0-10mA (load 500± 200Ω ), 4-20mA (load 250± 100Ω ), or 0-5V
(load≥ 100kΩ ), 1-5V (load≥ 100kΩ )
9. Exterior and hole size(mm): 96× 96× 110 92× 92
10. Power: AC85V242V, 50/60Hz
11. Working condition: Temperature 0-50.0C, relative humidity≤ 85%RH, without corrode
and strong electric radiation.
Panel instruction(consult)
Connection scheme(consult)
Model code
XMT ( ) - 9 ( ) 8 ( )
1 2 3 4 5
1:The surface dimension (mm)
Blank: 160×80×85 Installation hole 156×76 A: 96×96×80 Installation hole 92×92
D: 72×72×80 Installation hole 68×68 E: 48×96×75 Installation hole 44×92
F: 96×48×75 Installation hole 92×44 G: 48×48×110 Installation hole 44×44
S: 80×160×85 Installation hole 76×156
2: Operation display method:'9' 4-key gentle push-switch setting,double row 4-LED digital display,PID and ON/OFF(P=0)control can select.
3:Additional alarm:'1' No over-temperature alarm, but a group of time control output;
'3' A group of alarm ( upper limit alarm or follow-up alarm ) and a group of time-control relay output;
'5' No over-temperature alarm, but a group of time control output for buzzer alarm .
4:Input: '8' input signal can interchange free(no voltage and current input)
5:Suffix Blank:relay output G:solid relay output T:Time control function
Inner parameter
Series | Code | Name | Setting range | Manual | Ex-Factory |
| 0 | SP | Setting value of temperature | Determined by P-SL P-SH | Output corresponds to "OUT" indicator light | 50.0 |
| 1 | AL1 | Alarm 1 | Determined by P-SL,P-SH when the upper and lower limit alarm, it is0~50.0 when the positive deviation alarm and negative deviation alarm | please refer to ALP1 Corresponds to "ALM1" indicator light | 300 |
| 2 | AL2 | Alarm 2 | please refer to ALP2 Corresponds to "ALM2" indicator light | 100 | |
| 3 | P | Proportion modulus | 0~100 | When the P↑, the proportion and differential function↓; If the P↓, the proportion and differential function↑ When P=0, the meter is ON/OFF control | 15 |
| 4 | I | Calculus time | 0~2000S | 240 | |
| 5 | d | Differential time | 0~200S | 30 | |
| 6 | At | Setting itself | ON/OFF | ON: open setting itself function OFF: close setting itself function | OFF |
| 7 | t | Control period | 1~120S | The movements cycle ON/OFF of Setting relays control is no meaning, Relay is 20S, other is 2S. | 20 |
| 8 | Hy | Main control by drop in level | 0.1~50.0 | Only have meaning when main control output is ON/OFF(P=0) | 1.0 |
| 9 | Hy-1 | drop in level of AL1 | 0.1~50.0 | It is used as setting of drop in level for AL1 relay output | 1.0 |
| 10 | Hy-2 | drop in level of AL2 | 0.1~50.0 | It is used as setting of drop in level for AL2 relay output | 1.0 |
| 11 | Pb | Sensor error amendment | ±20.0 | The sensor have deviation can use item to revisal | 0 |
| 12 | FILT | Filt modulus | 0~50 | Is the software filter constants of measurement sampling. The constant ↑, the measurements antijamming capability↑, but the measurement and system time ↓. | 20 |
| 13 | dp | Display precision | 0~1 | 1: have radix point; 0: have not radix point | 0 |
| 14 | P-SH | The max.value of temperature range | - | They are used to reset proper temperature range as per user'application. As for the Max. temperature range for different inputs, please refer to Sn, P-SH≥P-SL | 1300 |
| 15 | P-SL | The min.value of temperature range | - | 0 | |
| 16 | OUTL | The min. value of allowable output | 0~OUTH | Can achieve low and high output limiter. Meaningless when manual and ON/OFF control | 0 |
| 17 | OUTH | The max. value of allowable output | OUTL~200 | 200 | |
| 18 | ALP1 | Alarm1 and output definition | 0~4 | 'o':indicate no alarm; '1':upper limit alarm '2':lower limit alarm; '3': Upper-limit (deviation) Alarm; '4': Lower-limit (deviation) Alarm; | - |
| 19 | ALP2 | Alarm2 and output definition | 0~4 | - | |
| 20 | COOL | System function choice | 0~1 | '0': reverse control(heat) '1': positive control(cool) | 0 |
| 21 | OPPO | Open power output | 0~100 | Soft start functionthat meters coefficient after first export of electric power | 0 |
| 22 | LOCK | Code lock | 0~50 | LOCK=0, all the parameter can be revised LOCK=1, only the SP can be revised LOCK>1, all the parameter can not be revised | 0 |
| 23 | Sn | Input type | CU50( ) PT100( ) PT100( ) K( ),E( ),J( ) T( ),S( ) | CU50 (-50.0~150.0ºC) ; PT1 (-200.0~200.0ºC) ; PT2 (-200.0~600.0ºC) ;K (0~1300ºC) ; E (0~700.0ºC) ; J (0~900.0ºC) ; T (-200~400.0ºC) ; S (0~1600ºC) ; | |
| 24 | OP-A | Output type | RLP( ) SSR( ) Zero( ) Mut( ) 0~10MA( ) 4~20MA( ) | RLP Relay output mode SSR Solid state relay Zero SCR zero voltage switching Mut SCR phase-shift trigger 0~10MA linearity control electric current output 4~20MA linearity control electric current output | __ |
