M95-1.1
AC Motor
Capacitor-start-and-run Single Phase Asynchronous Motor
High Speed
Driving
4 Inch
EG
Exporting Packing
stainless steel
Guangdong, China
84136010
Product Description
China 4" Submersible Deep Well Oil Cooling Motor
[CHARACTERS]
Conform to international standard of IEC34-ICE, whole blocked asynchronous motor with squirrel cage rotor.
Outer shell, shaft and bottom made of stainless steel.
Copper annoy or Nickel plated cast-iron upper and bracket.
Swedish bearing or equivalent products undertaking higher thrust load.
Italian mechanical seals.
Pressure automatic adjusting device made of oil and water proof reformed butyl-rubber.
Pressure automatic adjusting device made of oil and water proof reformed butyl-rubber.
Flange connector under the standard of NEMA (USA National Electrical Manufacturing Association).
Lacquer-coated wire conformed to USA standard of NEMA MW37-C.
Chinese patent product, fake and imitation will be investigated. Patent No.: ZL99240666.8 ZL99317606.2
[PROPERTIES]
Ratings: Singlephase: 0.25kW - 2.2kW, threephase: 0.55kW - 7.5kW
Voltage: Singlephase 220/230V (-6% +10%) or 230/240V (+6% -10%) 50Hz, Threephase 230V or 400V ± 10% 50Hz
Thrust load: 1500N (0.25kW - 0.75kW) NFS4
2500N (1.1kW - 5.5kW) NFS4
4500N (3.0kW - 7.5kW) NFS4
Degree of protection: IP68
Insulation: Class B
Max. Ambient temperature: 35 Dgrees
Minimum cooling flow along the motor: 8cm/sec.
Water pH: 6.5 - 8.0
Maximum starts per hour: 30
Maximum submerged depth: 150 meter
Vertical or horizontal mounting position
Motor protected by temperature compensated thermal relay and extra-quick trip.
Overload trip time: Less than 10 seconds (when 5 times of rating current)
Flat water proof cable 4× 2.0 mm2 with separated earth wire
Dimension: 19.2× 6.2mm2 Cable length: 1.1-1.5m (0.25 - 3.0 kW); 2.3-2.5m(4.0 - 5.5kW); 2.8-3.0m (7.5kW)
Special scaled product required by customers can be provided
[CHARACTERS]
Conform to international standard of IEC34-ICE, whole blocked asynchronous motor with squirrel cage rotor.
Outer shell, shaft and bottom made of stainless steel.
Copper annoy or Nickel plated cast-iron upper and bracket.
Swedish bearing or equivalent products undertaking higher thrust load.
Italian mechanical seals.
Pressure automatic adjusting device made of oil and water proof reformed butyl-rubber.
Pressure automatic adjusting device made of oil and water proof reformed butyl-rubber.
Flange connector under the standard of NEMA (USA National Electrical Manufacturing Association).
Lacquer-coated wire conformed to USA standard of NEMA MW37-C.
Chinese patent product, fake and imitation will be investigated. Patent No.: ZL99240666.8 ZL99317606.2
[PROPERTIES]
Ratings: Singlephase: 0.25kW - 2.2kW, threephase: 0.55kW - 7.5kW
Voltage: Singlephase 220/230V (-6% +10%) or 230/240V (+6% -10%) 50Hz, Threephase 230V or 400V ± 10% 50Hz
Thrust load: 1500N (0.25kW - 0.75kW) NFS4
2500N (1.1kW - 5.5kW) NFS4
4500N (3.0kW - 7.5kW) NFS4
Degree of protection: IP68
Insulation: Class B
Max. Ambient temperature: 35 Dgrees
Minimum cooling flow along the motor: 8cm/sec.
Water pH: 6.5 - 8.0
Maximum starts per hour: 30
Maximum submerged depth: 150 meter
Vertical or horizontal mounting position
Motor protected by temperature compensated thermal relay and extra-quick trip.
Overload trip time: Less than 10 seconds (when 5 times of rating current)
Flat water proof cable 4× 2.0 mm2 with separated earth wire
Dimension: 19.2× 6.2mm2 Cable length: 1.1-1.5m (0.25 - 3.0 kW); 2.3-2.5m(4.0 - 5.5kW); 2.8-3.0m (7.5kW)
Special scaled product required by customers can be provided
| 4" oil Cooling Submersible Motor(220/230.50Hz 60Hz) | |||||||
| TYPE | POWER | Single Phase | POWER FACTOR | RPM | L | KG | |
| KW | HP | A | |||||
| H4033M224 | 0.25 | 0.33 | 3 | 0.86 | 2850 | 290 | 7 |
| H4050M224 | 0.37 | 0.5 | 3.6 | 0.88 | 2850 | 315 | 8 |
| H4075M224 | 0.55 | 0.75 | 4.8 | 0.89 | 2850 | 335 | 8 |
| H4100M224 | 0.75 | 1 | 6.3 | 0.9 | 2830 | 360 | 9 |
| H4150M224 | 1.1 | 1.5 | 8.6 | 0.9 | 2820 | 390 | 11 |
| H4200M224 | 1.5 | 2 | 10.6 | 0.94 | 2820 | 435 | 12 |
| H4300M224 | 2.2 | 3 | 14 | 0.96 | 2820 | 480 | 14 |
| 4" Oil Cooling Submerisible Motor(380/415.50Hz 60Hz) | |||||||
| TYPE | POWER | Three Phase | POWER FACTOR | RPM | L | KG | |
| KW | HP | A | |||||
| H4075T218 | 0.55 | 0.75 | 1.7 | 0.8 | 2850 | 360 | 8 |
| H4100T218 | 0.75 | 1 | 2.2 | 0.81 | 2850 | 420 | 9 |
| H4150T218 | 1.1 | 1.5 | 3 | 0.82 | 2850 | 445 | 10 |
| H4200T218 | 1.5 | 2 | 3.9 | 0.82 | 2850 | 485 | 11 |
| H4300T218 | 2.2 | 3 | 5.6 | 0.83 | 2850 | 545 | 14 |
| H4400T218 | 3 | 4 | 7.3 | 0.83 | 2850 | 600 | 19 |
| H4550T218 | 4 | 5.5 | 10.3 | 0.83 | 2850 | 670 | 21 |
| H4750T218 | 5.5 | 7.5 | 13 | 0.85 | 2850 | 785 | 25 |
| H41000T218 | 7.5 | 10 | 17 | 0.85 | 2850 | 920 | 31 |
