CLK6150, CLK6156
24 Hours
1 Year
Metal
Metal-Cutting CNC Machine Tools
Contour Control
Semi-Closed Loop Control
CNC/MNC
0.01~0.02(mm)
Economical CNC Machine Tools
GS, CE, ISO 9001
New
Allway
W/Case
CLK6156/CLK6150
China
84581100
Product Description
1. This machine is a half closed loop CNC lathe machine, with a centralized automatic lubrication device, 4-station or 6-station electric tool post, once programming input can automatically realize the mechanical parts of the cylindrical, inner hole, thread, complex surface machining.The machine using CNC control system, control 2 axis movement at the same time, there is movement, linear and circular interpolation, thread cutting, all kinds of cutting cycle, coordinate system seted, the tool tip R and cutter offset compensation, and so on fully repair and auxiliary functions .Program compiled USES the international ISO standard, can manually entered program use the key on the panel or Input by data communication interface.
2.
4. STANDARD ACCESSORIES:
1) 1000mm Horizontal lathe bed.420mm width of lathe bed.
1000mm2) guide way surface of longitudinal ,cross slide stick PTFE,
3) Conversion frequency 3-shift (manual change speed),stepless in during one shift, Max speed 1600r/min, Main general motor:7.5KW
4) Spindle extra position cyclonic pump forced oil lubrication;
5) general manual 3-jaw chuck 250mm.
6) 4-position electric tool post.
7) Manual tailstock;
8) lead screw, guide way Auto intermittent lubrication.
9) double sliding door Semi-protection shield.
10) stationary type electronic handwheel;
11) Work light
12) general cooling device.
13) Manual remove chip.
14) GSK980TD CNC system.
5. OPTION ACCESSORIES:
1)FANUC/SIEMENS/MITSUBISHI/GT66T/KND CNC system.
2) Horizontal lathe bed 1500mm
3) General manual 3-jaw chuck 320mm;
4) Hydraulic pneumatic hollow, solid chuck.
5) 6-position electric tool post.
6) carriage with 'T' slot.
7) manual follow rest ,steady rest, hydraulic auto follow rest.
8)Hydraulic, pneumatic tailstock;
9) double sliding door full-protection shield.
2.
| Items | Unit | CLK6150P | CLK6156 | ||
| Max.swing over bed | mm | 520 | 570 | ||
| X-direction guideway span | mm | 220 | |||
| y-direction guideway span | mm | 420 | |||
| Max.swing over cross slide | mm | 280 | 325 | ||
| Distance between end of chuck to top of tailstock | mm | 920/1420 | |||
| Center height | From lathe bed | mm | 255 | 280 | |
| From ground | 1145 | 1170 | |||
| Spindle bore | mm | 88(manual chuck) | |||
| Pull rod Dia.of hollow Hydraulic chuck | mm | 75 | |||
| Spindle nose type | A2-8 | ||||
| Manual chuck | mm | 250 | |||
| Spindle taper | Metric 100,1:20 | ||||
| Spindle speed | r/min | Manual 3-shifts H:450-1600 M:130-470 L:40-150 | |||
| Tool post number | 4/6(optional) | ||||
| Tool size | mm | 25×25(4-position) 32×32(6-position) | 32×32 | ||
| X:lead screw SPEC. | mm | 25*4 | |||
| Z:lead screw SPEC. | mm | 40*8 | |||
| x/z rapid | m/min | 6/10 | |||
| X-direction travel | mm | 310 | |||
| Z-direction travel | mm | 785/1285 | |||
| Min setting unit | mm | 0.001 | |||
| Tailstock type | manual | ||||
| Tailstock sleeve diameter | mm | 75 | |||
| Tailstock sleeve taper | MT 5 | ||||
| Tailstock sleeve travel | mm | 150 | |||
| Total power | Kw | 12.5/16 | |||
| Main motor power | Kw | 7.5 | |||
| N/W | kg | 2200/2410 | 2350/2560 | ||
| Overall dimension | mm | 2675*1651*1795 3175*1651*1795 | 2570*1651*1795 3070*1651*1795 | ||
4. STANDARD ACCESSORIES:
1) 1000mm Horizontal lathe bed.420mm width of lathe bed.
1000mm2) guide way surface of longitudinal ,cross slide stick PTFE,
3) Conversion frequency 3-shift (manual change speed),stepless in during one shift, Max speed 1600r/min, Main general motor:7.5KW
4) Spindle extra position cyclonic pump forced oil lubrication;
5) general manual 3-jaw chuck 250mm.
6) 4-position electric tool post.
7) Manual tailstock;
8) lead screw, guide way Auto intermittent lubrication.
9) double sliding door Semi-protection shield.
10) stationary type electronic handwheel;
11) Work light
12) general cooling device.
13) Manual remove chip.
14) GSK980TD CNC system.
5. OPTION ACCESSORIES:
1)FANUC/SIEMENS/MITSUBISHI/GT66T/KND CNC system.
2) Horizontal lathe bed 1500mm
3) General manual 3-jaw chuck 320mm;
4) Hydraulic pneumatic hollow, solid chuck.
5) 6-position electric tool post.
6) carriage with 'T' slot.
7) manual follow rest ,steady rest, hydraulic auto follow rest.
8)Hydraulic, pneumatic tailstock;
9) double sliding door full-protection shield.
