CNC 3018 PRO Max Laser Engraver Wood Router Machine GRBL ER11 DIY Engraving Machine For Wood PCB Mini Engraver
Model | 3018 Promax |
Working area | 30cm*18cm |
Control board | 3 Axis |
Laser Choose | 0.5w 2.5w 5.5w 15w 40w |
Spindle | 300w/500w |
software | Laser GRBL |
Support system | Win7, win8, win10 |
Can engrave Metal | engrave stainless steel and colorized anodised aluminum |
Supported Formats | jpg, bmp, svg, G-code |
Engraving Accuracy | 0.01mm |
Your satisfaction is our relentless pursuit,start your DIY engraving adventure!
Q: Does this machine need to be assembled when I received it?
A: This machine comes as a kit. You need to assemble it yourself. All tools and part are included in the kit.
Q: Are there software and instructions can I get it?
A:You can get the software ,contact us.
Q: Which type computer system can run its software?
A:The software only support the Windows system.
Q: What material can it engrave?
A:Wood, bamboo, plastic, paper, leather, rubber, plywood, MDF, acrylic.
Q: Can I regulate the laser power or the laser power is adjustable?
A: Sorry that the Fixed laser power is not adjustable, but the engraving speed is adjustable.
Q: How long can the machine work continuously?
A: It can work continuously about 45 minutes, after the laser mould cool down(about half of an hour), then start work again.
Long time work continuously with shorten the laser module liftetime.
Q: When I receive it, how to let it work?
A: Fist of all, you need to plug the stepper motor power cable to the controller board, then installl the software and the driver,power supply the machine,that's all.
