ATS automatic transfer switch
ATS normal operating conditions:
1.The ambient temperature shall not be higher than +40ºC, or lower than -5ºC, and the daily average shall not exceed +35ºC.
2.The altitude of installation site shall not exceed 2000m.
3.Relative humidity shall not exceed 50% at the ambient temperature of +40ºC , a higher humidity is allowable at a lower temperature, the average maximum relative humidity is 90% in the wettest month at a monthly average minimum temperature of + 25 ºC,and special measures shall be taken for the condensation on surface of product due to temperature change.
4.Pollution class: class .
5.In place of no intense vibration and impact, no harmful gas corrosive and disruptive to the insulation, no sever dust, no conducting microparticle and explosive substance, no high electromagnetic interference.
ATS automatic transfer switch:
FTS series automatic transfer switch are mainly composed of power conversion actuator, circuit breaker and controller. This dual power switch with automatic, manual, power indicator, normal switch indicator, ready switch indicator working state. Switch's features are small volume, long life, low power consumption, light weight, stable work, easy to use and so on.
moulded case ATS Technical Date:
Output frequency: 50Hz
Output type: 2/4Poles
Output current: 63A
Output voltage: 110V, 220V, 380V, 440V
Output power: >500W
Input voltage: 110V, 220V, 380V, 440V
High reliability and safety
Service life reaching above 8, 000 times
Superior electro-magnetic compatibility
CE- and CCC-approved
Rated current: 63A
Poles: 2Poles, 3Poles and 4Poles
Suitable for shift of two-way power, transfer of load equipments and safe isolation
Certifications: IEC60947-3 and GB14048.3 standards
Packaging & Shinpping:
1.Standard export box package
2.Delivery Time: 10-15 days for batch goods.
ATS automatic transfer switch shingping:
1.Shipment port:SHANGHAI/NINGBO
2.By Air or by Sea for batch goods,Airport/ Port receiving;
3.Customers specifying freight forwarders or negotiable shipping methods!
Our Services
1.One to one service,Feedback within 24 hours
2.Design for special packing, Products printing and logo OEM
3.Find the solution for any problems actively
