KLJ18/15
Online Guidance, Onsite Installation
1 Year
Customized
Automatic
Vacuum Extruder
50Hz
2.5MPa
Less Than 120 mm
Less Than 60 mm
BRICKMAC
1200*700*1400 mm
Jiangsu China
Product Description
Extruder (Experiment purpose) KLJ18/15
The extrusion pressure of this machine is stable, the vacuum degree is high, and the cleaning is very convenient.length Only 10 bolts are needed to be completely disassembled, and it can be applied to pre-formula extrusion experiments of various materials, thereby avoiding waste caused by large-scale equipment experiments.Multiple formula tests can be done, which greatly improves the test efficiency and reduces the test cost.Hardened gear reducer and variable frequency speed regulation. A single experiment uses about 50 kg of raw materials.Comes with standard vacuum gauge. 
Flexible
Only 10 bolts are needed to be completely disassembled, and it can be applied to pre-formula extrusion experiments of various materials, thereby avoiding waste caused by large-scale equipment experiments.
Only 10 bolts are needed to be completely disassembled, and it can be applied to pre-formula extrusion experiments of various materials, thereby avoiding waste caused by large-scale equipment experiments.
Easy To Clean
The screws are removable to facilitate cleaning of internal deposits.
The screws are removable to facilitate cleaning of internal deposits.
Good Quality&High Efficiency
The extrusion pressure of this machine is stable, the vacuum degree is high, and the cleaning is very convenient.length
The extrusion pressure of this machine is stable, the vacuum degree is high, and the cleaning is very convenient.length
| Descriptions | |||||||||
| Model No. | KLJ18/15 | ||||||||
| Output | 300 Kg / Hour | ||||||||
| Voltage | 380 v | ||||||||
| Frenquency | 50 hz | ||||||||
| Extrusion pressure | 2.5 Mpa | ||||||||
| Dimensions | 1200*700*1400 mm | ||||||||
| Total weight | 700 kg | ||||||||
| Max extrusion width | ≤120 mm | ||||||||
| Max extrusion height | ≤60 mm |
