RoHS, ISO9001, CE
Electric Coil
Alumina Ceramic
Heating Wire
Tubular
300W Ceramic Resistor Igniter
Ceramic Biomass Igniter
Ceramic Pellet Ignitor for Fireplace
(40-200)Ohm
120-250V
L=94mm,D=17.5mm
Pellet Stove/ Biomass Boiler
900deg C in 60 Seconds
Ceramic Igniter for Pellet Stove
150W-300W
900degc-1100degc
50mm Long High Tem. Cable
Be Customised or Already Open Models
Pellet Grills, Pellet Smoking and BBQ
Ceramic Holder or Copper Thread
Jory
Box
Customized
Fujian, China
85168000
Product Description
Black 300W Ceramic Resistor Igniter for Pellet Stove with Ceramic Flange
Ceramic Pellet Igniter consist of Al2O3 insulation ceramics with an integrated W conductor, and reach a
permanent operation temperature of between 900°C and 1100°C.
Part No. | JORY108115 | |
Usage | ignition | |
Working Voltage | 120 VAC/ 230VAC | |
Power | 160 W / 180 W / 210 W / 225 W / 230 W / 240 W / 255 W | |
Dimension of product | Existing Sample: OD11.5*ID6.5*108MM, Holder Size: D17.5*35MM Customized sample is acceptable | |
Lead wire: | 300mm / 400mm / 500mm / 900mm (Customized is accept) | |
Electrode | Welding leads on the electrode | |
Advantages | Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket Air can flow through and around inside and outside of heater Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C Lifetime up to 100,000 heating cycles, depending on operating conditions Oxidation and corrosion-resistant Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures - the ideal ignition blower! Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible. |
Alumina Ceramic Heater Design Structure
Ceramic Heaters are manufactured by printing resistors on alumina shees,being laminated and sintered into one pieces* Types:
Rectangular alumina ceramic heating element
Round shape alumina ceramic heating element
Rod shape alumina ceramic heating element
Round shape alumina ceramic heating element
Rod shape alumina ceramic heating element
Tube shape alumina ceramic heating element
Pellet Igniter Supplier Advantages:
1) Higher temperature, about twice of traditional metal sheathed heater;
2) Shorter ignition
time, about 60~90 seconds
time, about 60~90 seconds
3) Electrically insulated with no exposed electric contacts
4) Wear and corrosion resistance
5) Long life time
6) Easy to install and replace
Pellet Stove Igniter Benefits:
Pellet Stove Igniter Benefits:
A fraction of the energy consumption compared to conventional cartridge or element heater.
Long-lasting (non-aging). Time to ignition 60~90 seconds. Tested to 100,000 cycles. Easy to install and retrofit. 800~1100°C at steady-state temperature. Impervious to oxidation and corrosion. Igniter kerosene, wood chips, split logs, coal briquettes or other biomass, corn, etc.
Long-lasting (non-aging). Time to ignition 60~90 seconds. Tested to 100,000 cycles. Easy to install and retrofit. 800~1100°C at steady-state temperature. Impervious to oxidation and corrosion. Igniter kerosene, wood chips, split logs, coal briquettes or other biomass, corn, etc.
Thermal Properties for Alumina Heater | ||
Item | Unit | Value |
Vickers Hardness | Gpa | 11.5 |
Flexural Strength | Mpa | 300 |
Compressive Strength | Mpa | 2000 |
Modulus of Elasticity | Gpa | 300 |
Poisson's Ratio | --- | 0.22-0.23 |
Fracture Toughness | Mpam1/2 | 3.5-4.0 |
Thermal Conductivity | W/(m·k) | 25 |
Thermal Expansion Coefficient | 10-6/ºC | 6.5-7.5 |
Thermal Shock Resistance | △TºC | 200 |
Maximum Use Temperature | ºC | 1600 |
Dielectric Strength | KV/mm | >12 |
Dielectric Constant | εr | 9-10 |
Dielectric Loss Angle (1MHz) | --- | 0.0002 |
Volume Resistivity | Ω.m | >1015 |
Specific Heat | J/(kg·k) | 0.78x103 |
Not without reason, the high temperature heating elements pellet igniter is the reliable standard ignition system for pellet heating systems in Europe-hundreds of satisfied customers speak for themselves.
Mass customization is available. we can open molding according to you your design drawing.
Our Certificate
ISO 9000; RoHS REACH
Inspection Standard
To ensure the quality of products, the in-process inspection and sampling inspection should be taken which based on the regulation of National GB/T 2828-2003.
Part 1.Sampling inspection of AQL standard.
In-process inspection VS Sampling Inspection
Inspection items | In-process inspection | QC sampling inspection | |
Inspection level | Acceptable quality level (AQL) | ||
Appearance | 100% inspection |
| 1.0 |
Straightness | 100% inspection | S-4 | 1.0 |
Dimension | 100% inspection |
| 1.0 |
Power-on Test | 100% inspection |
| 0.40 |
Dielectric Strength | 100% inspection |
| 0.65 |
About our factory:
our Product Equipment
Related Products
We can also provide other different types ceramic igniters such as 150w, 250w and 300w; black and white.
Ceramic igniter for pellet stoveIgnition resistance for pellet stoves, with 3/8'' brass flange
Hermetic/ perforated version.
Diameter: 11.55 mm.
Overall length: 107 mm.
Power: 300 Watt.
Maximum temperature: 1100 ° C
We also have other types like 250w, 150w ceramic igniter and other shape.
Detail Images
RFQ
1.What's the max using temperature ?
RFQ
1.What's the max using temperature ?
Max 1700degree
2.Which composition suitable for metallized ceramics?
95%, 96% alumina
3.What's the 99 alumina's major applications?
Pump Shaft,Drive Shaft,Sealing Ring
4.Can you do OEM?
We are mostly doing by drawing
5.What's the delivery time?
About 20days
2.Which composition suitable for metallized ceramics?
95%, 96% alumina
3.What's the 99 alumina's major applications?
Pump Shaft,Drive Shaft,Sealing Ring
4.Can you do OEM?
We are mostly doing by drawing
5.What's the delivery time?
About 20days
Our products family photo
