JBT 2
Welding
GB
Substation Fittings, Line Fittings
Tension Clamp
Aluminium
Hot-DIP Galvanized
Bimetal Pg Clamp
Heavy Duty Pipe Clamp
OEIpower
Cartons Pallets Wooden Case
IEC IEEE
China Nanyang
73269090
Product Description
Aluminum parallel groove clamps for tap-off
The Fuse Cutout type OEI was developed to operate in overhead distribution systems rated at 11
kV to 38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI can be applied on all three-phase system rated at or below the maximum
operational rating of the cutout.
Aluminum parallel groove clamps for tap-off connection of Al ACSR conductor.
RatingsETIM class Branch terminal Mechanical Tightening torque 20 Nm Dimensions
Main conductor mm² Al 16-120 Branch conductor mm² Al 16-120
FeaturesBolt 2xM8 Certificate Standards IEC 61238-1
The Fuse Cutout type OEI was developed to operate in overhead distribution systems rated at 11
kV to 38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI can be applied on all three-phase system rated at or below the maximum
operational rating of the cutout.
| Product | D Bracket | ||||||
| Test Items | Test Content | Test Result | |||||
| Sample 1 | Sample 2 | Sample 3 | Sample 4 | Sample 5 | Remarks | ||
| Visual Inspection | Crack | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×" Test Conclusion: |
| Stoma Trachoma | √ | √ | √ | √ | √ | ||
| Fins | √ | √ | √ | √ | √ | ||
| Burr | √ | √ | √ | √ | √ | ||
| Galvanizing thickness | μm | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×": Test Conclusion: |
| Mechanical Characteristics | Mechanical Load | √ | √ | √ | √ | √ | 1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion: |
| Inspector | Date: 02. March,2011 Approved: | ||||||
