As Per Requirement Drawing
Technique Support and Site Visit
1 Year
Customized
New
Electric
Manual
Two-Roll Cold-Hot Mill
ISO
Cast Steel
TX
as Per Customer Requirement
Customized
China
8455300000
Product Description
Unit price will be decided by engineering drawing.
Introduction:
With the graphite in the working layer and alloy element Mn, Cr, Ni, Mo, the base of IC can change into martensite. Therefore, the resistance to accident, resistance to spalling and resistance to wear are obviously improved. Moreover, IC roll can hold the hardness well in the working layer.
Manufacturing Process:
Material and Properties:
Applications:
Intermediate and finishing stands of bar, wire rod and medium section mills.
Forming, sizing, reducing and straightening rolls for pipe and tube mills.
Sleeves for Universal finishing stands (Horizontal & Vertical).
Introduction:
With the graphite in the working layer and alloy element Mn, Cr, Ni, Mo, the base of IC can change into martensite. Therefore, the resistance to accident, resistance to spalling and resistance to wear are obviously improved. Moreover, IC roll can hold the hardness well in the working layer.
Manufacturing Process:
Material and Properties:
| Grade | C | Si | Mu | Cr | Ni | Mo | V | W | Hardness (HS) | Tensile Strength (Mpa) |
| IC | 2.90/3.60 | 0.60/1.20 | 0.40/1.20 | 0.60/1.20 | - | 0.20/0.60 | - | - | 55/68 | >230 |
| IC I | 2.90/3.60 | 0.60/1.20 | 0.40/1.20 | 0.70/1.20 | 0.50/1.00 | 0.20/0.60 | - | - | 60/72 | >230 |
| IC II | 2.90/3.60 | 0.60/1.20 | 0.40/1.20 | 0.70/1.20 | 1.00/2.00 | 0.20/0.60 | - | - | 60/78 | >230 |
| IC III | 2.90/3.60 | 0.60/1.20 | 0.40/1.20 | 0.70/1.20 | 2.00/3.00 | 0.20/1.20 | - | - | 65/80 | >230 |
| IC IV | 2.90/3.60 | 0.60/1.20 | 0.40/1.20 | 0.70/1.20 | 3.00/4.80 | 0.20/1.20 | - | - | 68/85 | >230 |
| IC V | 2.90/3.60 | 0.60/1.20 | 0.40/1.20 | 0.70/1.20 | 3.00/4.80 | 0.20/2.00 | 0.20/2.00 | 0.00/2.00 | 75/90 | >230 |
Applications:
Intermediate and finishing stands of bar, wire rod and medium section mills.
Forming, sizing, reducing and straightening rolls for pipe and tube mills.
Sleeves for Universal finishing stands (Horizontal & Vertical).
