ST3207Q
Technical Support
No
Bottle Jack
5--50ton
>400mm
CE
New
Lifting
TOP JACK
Export Standard
20*17*23
China
Product Description
| Model | Capacity | Min.H | Lifting.H | Adjust.H | Max.H | N.W | G.W | Package | Measurement | Qty/Ctn | 20' Container | TWO HANDLE |
| (ton) | (mm) | (mm) | (mm) | (mm) | (kg) | (kg) | (cm) | (pcs) | (pcs) | (cm) | ||
| ST0507Q | 5 | 210 | 140 | 80 | 430 | 6 | 7 | Carton | 17x20x23 | 1 | 2100 | 24 |
| ST1207Q | 12 | 250 | 165 | 80 | 495 | 12 | 13 | Color Box | 24x18x28 | 1 | 1350 | 24 |
| ST2007Q | 20 | 260 | 170 | 80 | 510 | 16 | 17 | Color Box | 28x20x28 | 1 | 1000 | 24 |
| ST2007QL | 20 | 210 | 100 | 80 | 390 | 15 | 16 | Carton | 26x21x23 | 1 | 1150 | 24 |
| ST3207Q | 32 | 250 | 150 | / | 405 | 21 | 22 | Carton | 29x22x27 | 1 | 700 | 24 |
| ST5007Q-1 | 50 | 260 | 160 | / | 420 | 33 | 35 | Carton | 37x30x29 | 1 | 650 | 25 |
Notes:1.When the vehicle is jacked up,do not open the engine,because the engine vibrates and the weels of cars turned easy to cause the jack slide down.
2.Before operating the jack, find a fixed position.
Operating Instruction
1.Before operating,estimate the weight of the load,Do not overload the jack beyond its rated load.
2.Select point of action according to the gravitational center place the jack on the hard ground if necessary,place a hard plank under the jack so as to avoid tottering or falling during operation.
3.Before operating the jacks,first,insert the notched end of the handle.into the release valve.Turn the operating handle clock wise until release value is closed.Do not over tighten the value.
4.Insert operating handle into the socket and the ram is steadily raised by the up and down movement of the handle and the load is raised.the ram will stop rising when the required height is reached.
5.Lower the ram by turning the release valve.Counterclockwise with the notched end slacken it slowly when a load is applied,or accidents can occur.
6.When more than one jack is used at the same time it is important to operate the different jacks at an equal speed with equal load.Otherwise,there is danger of falling the entire fixture.
7.Violent shocks must be avoided during the operation.
8.User must operate the jack correctly according to operating instruction:If the jacks has some quality problems,it can not be operated.
Our factory is founded in Jiaxing city in 2004, our company is a special enterprise integrating research, design, developement and specialize in and manufacturing Hydraulic bottle jack, floor jack, long floor jack, air bottle jack, portable hydraulic equipment, jack stand, vehicle positioning jack, shop crane, load leveler, motorcycle lift, shop press, hydraulic shop press, etc.
