JMAEP
Injection Molding
GB
Line Fittings
T-Connector
JMA
Carton+Tray
350*350*200
China
8538900000
Product Description
Product Description
1KV-6KV Insulated Cable Clamp/Puncture Electrical Connector
Install with mains power outage.
describe
Waterproof insulation piercing connectors are suitable for most types of LV ABC conductors and connections to service and lighting cable cores. When the bolt is tightened, the teeth of the contact plate penetrate the insulation and establish a perfect contact. Tighten the bolt until the head shears off. Guaranteed tightening torque (fuse nut). Avoid peeling off insulation.
Operating Conditions: <6KV,>1kV, 50/60Hz, -50°C to 85°C
Standards: IEC 61284, EN 50483, IRAM2435, NFC33 020.
Material
Body: PA 66
Connection bridges: tinned copper, tinned brass, aluminum
Seal: Flexible PVC
End Cap: Flexible PVC
Grease: Silicone grease
Bolts: Hot-dip galvanized steel, grade 8.8
Washers, Nuts: Zinc-plated steel
Fuse Nut: Zinc Alloy
feature
• Watertightness tested underwater at 6 kV for 30 minutes
• Potential free tightening bolts allow safe installations on life lines
• Bi-metal, suitable for aluminium and copper conductors
• Long neck 10 mm shear nut for reliable installation
• Components not isolated, end caps attached to body
• Insulation material made from weather-resistant and UV-resistant glass fiber reinforced polymer
Model JMAEP
Main line 4.0-95(mm2)
Branch line 1.0-10(mm2)
Bolt 1
Torque (Nm) 10NM ±2
1KV-6KV Insulated Cable Clamp/Puncture Electrical Connector
Install with mains power outage.
describe
Waterproof insulation piercing connectors are suitable for most types of LV ABC conductors and connections to service and lighting cable cores. When the bolt is tightened, the teeth of the contact plate penetrate the insulation and establish a perfect contact. Tighten the bolt until the head shears off. Guaranteed tightening torque (fuse nut). Avoid peeling off insulation.
Operating Conditions: <6KV,>1kV, 50/60Hz, -50°C to 85°C
Standards: IEC 61284, EN 50483, IRAM2435, NFC33 020.
Material
Body: PA 66
Connection bridges: tinned copper, tinned brass, aluminum
Seal: Flexible PVC
End Cap: Flexible PVC
Grease: Silicone grease
Bolts: Hot-dip galvanized steel, grade 8.8
Washers, Nuts: Zinc-plated steel
Fuse Nut: Zinc Alloy
feature
• Watertightness tested underwater at 6 kV for 30 minutes
• Potential free tightening bolts allow safe installations on life lines
• Bi-metal, suitable for aluminium and copper conductors
• Long neck 10 mm shear nut for reliable installation
• Components not isolated, end caps attached to body
• Insulation material made from weather-resistant and UV-resistant glass fiber reinforced polymer
Model JMAEP
Main line 4.0-95(mm2)
Branch line 1.0-10(mm2)
Bolt 1
Torque (Nm) 10NM ±2
