Split Pressurized Solar Water Heater with double coil
This system is made up of solar collector, water tank and workstation. It's a closed loop solar system. This system is suitable for areas with questionable water quality and all climate conditions. It's preferred option for extremely cold areas.
1. It can withstand pressure of tap water when it works, working pressure 0.6MP.
2. Completely automatic operation, the whole system controlled by the workstation.
3. Collector separated with the storage tank. The tank can be put anywhere of the house, combine with the building perfectly.
4. There is one or two copper coil exchanger in the tank.
5. Heat the top water instantly, there is no need to wait.
6. Drinking water quality to promote life quality.
7. Back up with electric heater so that in the days without sunshine hot water can also be used.
8. Capacity:100L,150L,200L,250L,300L,400L,500L, 800L,1000L.
Accessories:
1) Electrical heater, as an auxiliary heating element in case of raining or snowing days so as to ensure a continous hot water supply
2) Anode magnesium Bar: soften hard water in system so as to protect storage tank and copper coil from water scale effectively
3) T/P valve, Stainless bolts & nuts, anti-aging rubber seal, pipe holder make their life as long as other parts of the system
Warranty:
3 years international responsibility for integrated system exchange and 15 years for glass vacuum tube compensation due to original quality problems
Technical Parameters
Heat Pipe Solar Collector | Spec.(mm) | Φ47×1500 Φ58×1800 |
Tube (pcs) | 12 / 15 / / 20 / 25 / 30 | |
Vacuum Tube | Borosilicate glass, red copper heat pipe, aluminum fin | |
Manifold | Copper flow passage, PU insulation, Aluminium alloy shell | |
Water Tank | Capacity | 100 ~ 500L for storage tank |
Inner Tank | Food-grade stainless steel SUS304-2B 1.2-2.0mm | |
Copper coil | High-quality red copper coil Φ12X1.0mm | |
Insulation | High-density polyurethane integrated foam-forming 50mm | |
Tank shell | Color steel plate | |
Collector Bracket | Spec.(mm) | 1.5 ~ 2.0mm in thickness |
Material | Aluminium alloy plate | |
Accessories | Workstation system, Electric heater, E-Parts box, thermostat, Switch, Anode magnesium bar, T/P valve, Relief valve, dustproof ring | |
Working Pressure | ≥ 6 bar | |
Hail Resistance | Φ25mm diameter | |
