XMR403VT
After Sales Service Is Avaliable
1 Year
Road Roller
Wheeled
Biaxial Dual-Drum
Light Grind
35cm
Diesel Engine
35cm/s
30.5KN
ISO 9001:2000
New
SILKWAY
Container
China
Product Description
XMR403 is a light vibratory roller with operating weight of 4 tons. This machine is suitable for surface and edge compaction construction for asphalt engineering, cement engineering and So on, also suitable for sub-base and base, sand and gravel material compaction work, is the idealist compaction machinery for all sorts of parking lot construction, road, sidewalks and bikeway compaction, as well as a variety of road maintenance engineering.
Performance Characteristics:
* Closed hydraulic drive system is adopted to realize stepless speed change.
* Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high braking torque, ensuring the safety of the product.
* The front vision of machine is less than 1x0.75 m, rear view without any shade, which provides drivers with a good sight range.
* Large ground clearance and curb clearance, strong trafficabilit, good edge compaction performance.
* The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions.
* High frequency vibration and excitation force design, high working efficiency, good compaction effect.
* This machine has also the air intake preheating function, can realize low temperature cold start.
* Vibration drum width is larger than frame width, convenient to observe compaction condition of drum edge in the construction.
* Changchai water-cooled turbocharged engine, in compliance with China Stage III emission requirements, allowing machine working normally in the environment at an altitude of 2000 meters and temperature above -20 ºC.
Item | Unit | XMR403 |
Operating mass | kg | 4000 |
Static linear load (front drum/rear drum) | N/cm | 157/157 |
Vibrational frequency | Hz | 60 |
Amplitude | mm | 0.41 |
Exciting force | kN | 42 |
Vibrating drum (Diameter x width) | mm | 800x1300 |
Theoretical gradeability | % | 30 |
Operating speed | km/h | 0~10.6 |
Wheel base | mm | 1920 |
Steering angle | ° | ±30 |
Swing angle | ° | ±10 |
Minimum turning radius | mm | 3062 / 4362 |
Minimum ground clearance | mm | 348 |
Engine type | ZN490B | |
Rated power | kW | 36 |
Rated speed | r/min | 2600 |
