Introduction:
1.The screw threads being locked by polygonal deformation of one or more turns of the thread.
2.This deformation results in a powerful locking on rhe sides of the screw thread and counteracts the unscrewing effects of dynamic stress,vibrations and thermal loads.
3.Colour:Red;stainless steel true colors.
Features:
Wear resistance
Corrosion resistance
Heat resistance
Material saving
Can be customized if necessary
Provide a durable threaded hole in a soft material
Eliminating a machining operation
Specification:
| Nominal Thread Size | Size Design-ation | "Q"Nominal Length | Qutside Diameter | Number of Coils Nominal Length | |||
| 1Dia | 2Dia | Min | Max | 1Dia | 2Dia | ||
| M20*1.5 | 20CN | 20 | 30 | 50 | 60 | 23.7 | 24.2 |
| M20*2 | 20CN | 20 | 30 | 50 | 60 | 23.7 | 24.2 |
| M20*2.5 | 20CN | 20 | 30 | 50 | 60 | 23.7 | 24.2 |
| M22*1.5 | 22CN | 22 | 33 | 55 | 66 | 26 | 26.52 |
| M22*2 | 22CN | 22 | 33 | 55 | 66 | 26.3 | 26.8 |
| M22*2.5 | 22CN | 22 | 33 | 55 | 66 | 26.3 | 26.8 |
| M24*1.5 | 24CN | 24 | 36 | 60 | 72 | 28.4 | 28.92 |
| M24*2 | 24CN | 24 | 36 | 60 | 72 | 28.6 | 29.1 |
| M24*3 | 24CN | 24 | 36 | 60 | 72 | 28.6 | 29.1 |
| M27*1.5 | 27CN | 27 | 40.5 | 67.5 | 81 | 31.44 | 32.14 |
| M27*2 | 27CN | 27 | 40.5 | 67.5 | 81 | 31.94 | 32.56 |
| M27*3 | 27CN | 27 | 40.5 | 67.5 | 81 | 32.2 | 32.7 |
| M30*1.5 | 30CN | 30 | 45 | 75 | 90 | 34.64 | 35.44 |
| M30*2 | 30CN | 30 | 45 | 75 | 90 | 34.94 | 35.74 |
| M30*3.5 | 30CN | 30 | 45 | 75 | 90 | 35.2 | 35.7 |
| M33*2 | 33CN | 33 | 49.5 | 82.5 | 99 | 38.3 | 38.8 |
| M33*3.5 | 33CN | 33 | 49.5 | 82.5 | 99 | 38.3 | 38.8 |
| M36*2 | 36CN | 36 | 54 | 90 | 108 | 42.1 | 42.6 |
| M36*4 | 36CN | 36 | 54 | 90 | 108 | 42.1 | 42.6 |
| M39*2 | 39CN | 39 | 58.5 | 97.5 | 117 | 45.1 | 45.6 |
| M39*3 | 39CN | 39 | 39 | 78 | 97.5 | 55 | 55.5 |
Process of installation:
Drilling→Tapping→Installing→Breaking off tang
Tools:
1. Drill: used for drilling the base holes
2. Taps: used for the processing special internal thread of the base holes.
3. Installation tools: put sets into the threaded hole.
4. Break-off tools: break off the tang of thread insert.
5. Extraction tools: used for removing the damaged thread insert from the threaded hole.
Related Products:
