Mo-1
Aviation, Electronics, Industrial, Medical, Chemical
JIS, GB, DIN, BS, ASTM, AISI
>99.95%
Non-alloy
Molybdenum Wire
Not Powder
Mo-1
1.0mm, 1.6mm, 3.17mm, 3.2mm etc.
10 - 25kg / Roll
Black
for Thermal Spraying Machine
FOTMA
Customer Standard
ISO9001: 2000, ASTM
P. R. China
81029600
Product Description
Molybdenum Spraying wire is used as a thin coating on the surface of automobile components subjected to wear, such as piston rings, gearbox synchromesh parts, selector forks, etc.
Molybdenum spraying wire is also sprayed onto machine parts such as bearing for repair purposes.
Materials: Pure molybdenum, Mo>99.95%, impurities <0.05%, each element content <0.01%
Appearance: Molybdenum spraying wire is covered with graphite. After removed graphite, it is metallic luster.
Molybdenum spraying wire Properties:
Why Choose Us?
1. The weight of single wire is up to 20-25kg without any welded joint, which results in enhancing the efficiency and decreasing the operating costs.
2. Diameter: 3.175mm, 2.3mm-1.41mm
3. Tolerance: 3.175mm + / -0.025mm or + 0 / -0.05mm
2.3mm-1.45mm + / -0.02mm + 0 / -0.05mm
4. Tensile strength: >700-900N / mm2
5. Elongation: >20-5%
Pure Molybdenum Chemical Composition In %:
Brand | Mo Content | Maximum Content of Impurities | |||||
Total | Al | Si | C/Fe/Ti | Ni/O/Cr | Ca/Mg/Na | ||
HLMo1 | ≥99.95 | 0.05 | 0.002 | 0.003 | 0.005 | 0.003 | 0.002 |
State of Finished Molybdenum Spraying Wires:
Sizesmm | Surface | Reel Weightkg | Packing |
Φ3.17 | Black | 10~25 | Self-coiling |
Φ2.31 | Black | 10~25 | Self-coiling |
Φ1.60 | Black | 10~25 | Self-coiling,or reel |
Φ1.45 | Black | 10~25 | Self-coiling,or reel |
Our Packing:
