The Battery Internal Resistance Analyzer, also known as the general-purpose rechargeable battery internal resistance tester, is designed to measure the internal resistance, voltage, and temperature of rechargeable batteries such as lead-acid and lithium batteries. It serves as an instrument to assess the health status of batteries and can also be used for measuring the Equivalent Series Resistance (ESR) parameters of electrolytic capacitors (for reference only). This instrument employs AC 4-terminal testing method to measure battery internal resistance, ensuring accurate measurements unaffected by contact resistance between test leads, terminals, and battery electrodes. It features functions such as data storage, data retrieval, alarms, and automatic shutdown. The device is sophisticated in design, broad in measurement range, high in resolution, easy to operate, portable, accurate, reliable, and stable in performance, with strong anti-interference capabilities. It is indispensable in scenarios such as battery production, battery installation, equipment production, and equipment maintenance.
The general-purpose rechargeable battery internal resistance analyzer is controlled by a microprocessor, equipped with a 16-bit ADC internally to accurately detect battery internal resistance, voltage, and temperature. It operates without stopping the UPS system during measurement, using AC low-resistance measurement and noise reduction technology. This allows measurements to be conducted without interrupting the normal operation of the equipment being tested, significantly reducing testing time. Additionally, it includes features such as data storage, bar graph display, data upload to computers, and wireless measurement and data retrieval via Bluetooth connection with smart devices like computers, smartphones, and tablets.
| Measurement | Maximum Display | Maximum Resolution | Testing Accuracy |
| 0.000mΩ~3 Ω | 3.100 Ω | 1 uΩ | ±0.5 % |
- Voltage Measurement Accuracy
| Measurement | Maximum Display | Maximum Resolution | Testing Accuracy |
| 0.000V~70 V | ±71.00 V | 1 mV | ±0.2 % |
- Temperature Measurement Accuracy
| Measurement | Maximum Display | Maximum Resolution | Testing Accuracy |
| -10.0ºC~60.0ºC | 60.0ºC | 0.1ºC | ±1.0ºC |
| Functions | Battery internal resistance, battery voltage, temperature |
| Accuracy Assurance for Temperature and Humidity | 23ºC±5ºC,Below 75%rh |
| Power | DC 3.7V lithium battery |
| Resistance Resolution | 1 u Ω |
| Voltage Resolution | 1 mV |
| Temperature Resolution | 0.1ºC |
| Measurement Ranges | Internal Resistance: 0.000 mΩ to 3.100 Ω (4 ranges) |
| Voltage Measurement: 0.000V to ±71.00V (2 ranges) | |
| Temperature Measurement: -10.0ºC to 60.0ºC (single range) | |
| Maximum Input Voltage | DC 70V (+ measurement terminal to - measurement terminal), no AC input allowed |
| Measurement Method | Internal Resistance Measurement: 1kHz AC 4-terminal test method, open circuit terminal voltage 3V max Measurement Current: 2.0mA to 200mA (varies with range settings) Temperature Measurement: NTC temperature sensor (10KΩ at 26ºC) A/D Conversion Method: Successive approximation type Display Update Rate: 5 times per second |
| Response Time | 200ms |
| Measurement Time | Approximately 2 seconds |
| LCD Size | 70.1mm × 52.6mm / 3.5 inches (320×240 resolution 16-bit color screen) |
| Instrument Dimensions | Length × Width × Height 190mm×121mm×51mm |
| USB Interface | Includes USB interface for data storage, upload to computer, and saving for printing |
| Bluetooth Connection | Yes |
| Hold and Storage Functions | Manual hold and storage, automatic hold and storage |
| Measurement Judgment Function | Preset PASS, WARNING, FAIL threshold judgments |
| Battery Voltage | Displays 5 levels of battery capacity, alerts for low battery voltage to prompt charging |
| Auto Power Off | Automatic shutdown after approximately 15 minutes of inactivity (can be disabled in settings) |
| Power Consumption | 300mA MIN / 500mA MAX |
| Weight | Instrument: 480g (including battery) |
| Operating Temperature and Humidity | -10ºC~40ºC;≤80% RH |
| Storage Temperature and Humidity | -20ºC~60ºC;≤70% RH |
| Insulation Resistance | ≥20MΩ (between circuit and housing at 500V) |
| Withstand Voltage | AC 3700V/RMS(between circuit and housing) |
| External Magnetic Field | <40A/m |
| External Electric Field | <1V/m |
| Compliance with Safety Standards | IEC 61010 |
Q1:Is your company a sales or a manufacturer?
We are an integrated trade and manufacturing company with our own factory.
Q2:If we need to customize our own brand or if there are special requirements for the built-in software of the machine, can it be customized?
Yes, we accept OEM/ODM/OBM and can customize the built-in software of the product according to the customer's special requirements.
Q3:What is the usual lead time? How long can we receive the order after placing it?
In normal circumstances, products in stock can be received within 5 to 7 days via the fastest international express. Other situations may vary depending on the quantity of products ordered, whether there are special customization requirements, and the delivery time chosen.
Q4:How can we ensure that the product will not be damaged during transportation, considering the large size of the product?
We have professional internal and external packaging to ensure the safety and stability of the products during transportation. For fragile or other special parts, we will include an extra set to ensure that the customer can use the product immediately upon receipt.
Q5:How do you handle after-sales service? What if there is a quality problem with the product or if the customer does not know how to operate it?
For quality issues that are not caused by human error, we provide a one-year warranty from the time the product is delivered, and lifetime technical support. Other after-sales issues will be addressed by our professional technical staff within 24 hours. The product comes with a user manual and an operation video.
