HDCD-2410
1 Year
1 Year
Storage Battery Tester
Charge and Discharge
Lead-acid Battery
Customized
HD Power
Wooden Box with Foam Inside
Made in China
9030899090
Product Description
HDCD Battery Charge tester
General information
HDCD Battery Charge Tester is composed of filter module, rectifier module, inverter module, power conversion module and control unit
It is portable tester with light weight and small size .
Technical Parameter
General information
HDCD Battery Charge Tester is composed of filter module, rectifier module, inverter module, power conversion module and control unit
It is portable tester with light weight and small size .
Technical Parameter
Input characteristic | Input Voltage | 220Vac±10%,L+N+PE |
| Grid Frequency | 45Hz~65Hz | |
| Power Factor | ≥0.94 @50%~100% full load output power | |
| THDi | ≤5% @50%~100% full load output power | |
| Efficiency | >94%(full load) | |
| Input Current | <16A | |
| Input Power | <3.2KW | |
| Standby Power | 35±0.5W | |
| Weight | 12KG | |
| Circuit topology | Isolation type | |
Output Characteristic | Output power | 3KW |
| Output voltage range | 2-30V/dc | |
| Output Channel | 1 channel | |
| Output current range | 0-100A/dc | |
| Output constant power range | ---- | |
| Constant power section current range | ---- | |
| Number of parallel modules | 1 piece | |
| Voltage Precision | <±0.5% | |
| Current Precision | ≤±1%(20%~100% rated range) | |
| Output Ripple | ≤1% | |
| Time Precision | ≤±10S/24h | |
| Charging Precision | Voltage/0.1V Current /0.1A Time/1S | |
| Enviroment | Working Temperature | -20ºC~+75ºC |
| Storage Temperature | -30ºC~+75ºC | |
| Relative Humidity | ≤95%RH | |
| Altitude | ≤2000m, >2000m ,working temperature decrese 1ºC per increasing 100m | |
| MTBF | >500,000 hours | |
Others | BMS Power Supply | 12V/24V optional(Generally it can not offer this function ) |
| Protection Function | Input over/under voltage protection, output overvoltage protection, overtemperature protection, internal bus fault protection , shirtcircuit protection , communication interupt and reverse connection protection . | |
| Connector | Anderson /REMA/ Charging gun/client request | |
| Communication Method | RS232/RS485/CAN2.0(A/B) optional | |
| Indicator Light | Red Light: Power Yellow Light : Normal Working Red Light: Fault | |
| Cooling | Water cooling or self cooling | |
| Start-up time | Output start up time 3~8s | |
| insulation resistance | Insulation resistance between DC parts , AC parts to shell and AC parts to DC part ≥10MΩ | |
| ROHS | R5 | |
| Degree of protection | IP66 |
