GEL-20
Footwear & Leather, Packing, Woodworking
Instant Adhesive
Clear
Organic Material
Solvent
Footwear & Leather, Packing, Woodworking, Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing, Bonding Porous or Absorbent Materials
Instant Adhesive
Clear
Organic Material
Solvent
Acrylic
Room Curing
Stabilizer
7085-85-0
C6h7no2
230-391-5
Ethyl-Cyanoacrylate
Weatherablity and Waterproof
15months
100000 Cps
Over 10 MPa
10-45 Seconds
30 Minutes
7.0 Kgs
0.044m3/CTN
365*348*350mm
Juju, Ever, Okebond, or OEM
Paper CTN
20g/Bottle/blister, 12Cards/Box, 12Boxes/CTN
China
35069900
Product Description
High Viscosity Gel Super Glue
20 Gram in Bottle
OkeBond® Gel Adhesive is a high-strength, high-viscosity, single-
component ethyl instant adhesive. Its high viscosity and low fluidity
properties are widely used in vertical bonding operations and for
materials with high permeability
Super Glue Gel's thick viscosity is perfect for clean, vertical, porous surfaces for porcelain, wood, hard, leather. Quick-setting gel adhesives allow for a more accurate application as they do not drip or run
Power Gel Super Glue is one type of Strong, Fast, Non-Sagging, right for vertical precise fixing and bonding. Good integration with porous and smooth Surface and differant materials
Fast-drying formula bonds instantly and sets in 10-30 seconds;
paintable and sandable
Viscosity up to 10000 ~ 30000 cps
1. Works Best On: Aluminum / Ceramic / China/ Hard and Soft Wood/ Jewelry/ Leather/ Metal/ Most Plastics/ Pottery/ Rubber/Vinyl
2. GEL, No drip or run
3. Strong and Powerful Strength
4. Fast Setting
5. 1 drop per square inch of surfac is enough, too much adhesive would be drop down the bonding effect
6. Fixing: Assemble parts and hold together with pressure for 15 seconds or until set
7. Wipe top of nozzle if adhesive has accumulated before recapping tube securely after use
8. For best results, surfaces should be clean and dry and items should fit together well
2. GEL, No drip or run
3. Strong and Powerful Strength
4. Fast Setting
5. 1 drop per square inch of surfac is enough, too much adhesive would be drop down the bonding effect
6. Fixing: Assemble parts and hold together with pressure for 15 seconds or until set
7. Wipe top of nozzle if adhesive has accumulated before recapping tube securely after use
8. For best results, surfaces should be clean and dry and items should fit together well
Technical Specifications:
Initial color: Clear, transparentFinal color: Clear
Set time: 10-30 seconds
Full Strength: 24 hours
Operating Temperature Range: -650 to 1800F
(-540 to 820C)
1) Open the lid and puncture the seal with a needle.
2) Ensure both surfaces are close-fitting, clean and dry.
3) Apply one drop per square inch on one surface only.Avoid spilling
super glue spreads by itself when two surfaces are joined
4) Place in desired position immediately. Apply slight pressure for ten
seconds. (Actual setting time may vary slightly depending on the
surfacesto be bonded.)
5) After use, wipe tip of tube clean with cloth. Replace cap tightly on the
tube and store upright in a cool and dry place
2) Ensure both surfaces are close-fitting, clean and dry.
3) Apply one drop per square inch on one surface only.Avoid spilling
super glue spreads by itself when two surfaces are joined
4) Place in desired position immediately. Apply slight pressure for ten
seconds. (Actual setting time may vary slightly depending on the
surfacesto be bonded.)
5) After use, wipe tip of tube clean with cloth. Replace cap tightly on the
tube and store upright in a cool and dry place
Keep containers tightly closed in a cool, well-ventilated place. Store away from water or moisture. Temperature around 25c and
humidity around 60% will be helpful to entend the shelf life and keep the high performance of the bonding effect
Company IntroductionTop Brand Super Glue Supplier in China
ZheJiang Jiuerjiu Chemical Co.,ltd is a high-tech company specialized in the Instant glue adhesive products in China, locate in Ningbo Chemical Industrial Park
JUJU brand Super Glue mainly designed for household repairing like Shoes, Metal, Glass, Toys, Most Plastics and so on. The glue made from high purify monomer and the performance is much higher than the ordinary glue in the market, we have been attracting the best industry experts in this line to our company all the time. The chemical research department of Ningbo University is our partner.
Oke-Bond is specialized in the Industrial Adhesive products, like the Automotive, New Energy, Defense Industry, Smart Home,3C Electronic products. From 2022 we are more focus on research and development, manufacturing of industrial adhesives, to provide our users with one-step solutions for adhesive technology.
"Small Glue, Powerful Strength" is a good explanation of our Brand.
Small Glue, Great Power! Craftsmanship manufacturing, Building World-famous Brand |
