20L Rubber Kneader for mixing rubber material
The closed mixer is abbreviated as an internal mixer. A mixer that applies shear force to materials by rotating blades and impellers inside a sealed cylindrical container. The container and impeller are both equipped with small holes, which can be used to adjust the material temperature by heating or cooling, and are used for mixing plastics or rubber. The advantage of this mixer is that it has minimal risk of dust flying and smoke spreading. The Banbury mixer is a typical representative of it.
| Model | X(S)- 1.5L | X(S)- 3L | X(S)- 5L | X(S)- 10L | X(S)- 20L | X(S)- 35L | X(S)- 55L | X(S)- 75L | X(S)- 95L | X(S)- 110L | X(S)- 150L | |
| Total yolume of mixing chamber | L | 5 | 8 | 15 | 25 | 45 | 75 | 125 | 180 | 210 | 250 | 325 |
| Working volume of mixing chamber | L | 1.5 | 3 | 5 | 10 | 20 | 35 | 55 | 75 | 95 | 110 | 150 |
| Driving motor power | KW | 5.5 | 7.5 | 11 | 18.5 | 37 | 55 | 75 | 110 | 132 | 185 | 220 |
| Titing motor power | KW | 0.55 | 0.75 | 0.75 | 1.1 | 1.5 | 2.2 | 2.2 | 4 | 5.5 | 5.5 | 5.5 |
| Tilting motor angle | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | |
| Rotor shaft speed (Front/rear) | r/min | 40/31 | 32/26 | 38/30 | 32/26 | 32/26 | 32/26 | 32/26 | 32/26 | 30/24. | 30/24.5 | 30/24.5 |
| Pressureof compressed air | Mpa | 0.2-0.4 | 0.5-0.8 | 0.5-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| Flow of compressed air | mmin | ≥0.3 | ≥0.3 | ≥0.5 | ≥0.5 | ≥0.7 | ≥0.9 | ≥1.0 | ≥1.0 | ≥1.5 | ≥1.5 | ≥2.0 |
| Pressure ofheatng sfeam (Rubber miing) | Mpa | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.3-0.4 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 |
| Pressure of heating steam (Plastics mbxing) | Mpa | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | |||
| Dimensions | L mm | 1980 | 2050 | 2050 | 2300 | 2360 | 3200 | 3290 | 3760 | 3870 | 4075 | 4250 |
| Wmm | 950 | 1080 | 1080 | 1350 | 1750 | 1900 | 1950 | 2280 | 2400 | 2712 | 2750 | |
| H mm | 2010 | 2130 | 2130 | 2120 | 2430 | 2950 | 3020 | 3120 | 3450 | 3580 | 4106 | |
| Weight | KG | 1000 | 1200 | 1300 | 3000 | 4500 | 6000 | 7200 | 9200 | 12500 | 14000 | 19500 |
Can be customized according to your requirements
If you are interested in our products or have any questions please contact us freely.
We will try our best to meet your requirement at first time.
Company introduce
Qingdao Honghesheng Industry Co., LTD, which is located in the west coast of Qingdao economic district, with 10 million registered capital. The company covers an area of 5000 square meters with 26 professional and technical staffs and 5 senior engineers. The technical staffs have working experience in large tire enterprise who can design more suitable equipment for the customer as for tire production process. Also they can provide new factory site planning and other services.
The company's main products are: Rubber kneader, rubber mixing mill, rubber sheet cooling machine, inner tube production line,tyre production line, vulcanizing press, waste tyre recycling plant…The products have been sold to 20 provinces in China and exported more than 10 countries and areas. The stable quality and timely service obtain the positive feedback and are high praised.
"Quality, integrity, innovation, service"is the aim of our company. We would like to promote cooperation with national new and old customers and foreign clients and seek common development.
we can not only supply the kneader ,but also supply open mix mill, calendar,rubber cutter,hot press
FAQ
1. Q: Are you a manufacturer or training company?
A: We are the manufacturer. We have our own plant,worker and techniques research developing department.
2 .Q: Where is your factory located? How can I visit there?
A: Our factory add is Tieshan industrial Park, Jiaonan, Qingdao, Shandong province, China.
Nearest airport is Qingdao liuting international airport
Kindly send plane information in advance, so that we can pick you up at the airport, and book hotels as you require.
3. Q: What are your hot sale machine?
A: Our rubber and plastic machines are popular in the foriengn market. And main products are tyre recyling plant ,press machine and other machine.
4. Q: How does your factory do regarding quality control?
A: Quality is priority and we have our own quality control department. We win make a strick inspectin before the machines leave the factory.
5 .Q: Are the techncal parameter is fixed?
A: Basically, each model corresponding to the related machine. But we can design different type machine according to the client's requirement.
Leave your cellphong? Skype? whatsApp?viber? so that we can talk efficiently.
