- Hot-plugging
Hot-plugging charging modules, easy installation and maintenance.
- Current sharing
Auto current sharing between modules, current imbalance less than 5%.
- Output current adjustment
Through external monitor module, current limiting point of module can be configured continuously from 0A to 50A (40A). Current on the battery side can be configured continuously in both charge and discharge mode.
- Output voltage adjustment
Through external monitor module, the output voltage of module can be configured continuously from 200Vdc to 950Vdc, and the minimum adjustment step is 0.1Vdc.
- Over/under voltage protection
- Over temperature protection
- Short circuit protection
Specifications | |
Dimensions | 85mm(H)×226mm(W)×376mm(D) |
Weight | ≤9.5kg |
Efficiency(full load) | >98.5% |
Cooling Mode | Forced air cooling |
Communication Bus Protocol | CAN Bus |
No. of Parallel Modules | ≤60 pcs |
Indicator | Green: normal operation Yellow: protection alarm Red: fault |
DC Bus Side | |
Voltage Range | 200Vdc~950Vdc |
Current Range | 0A~40A |
Stabilized Voltage Precision | ≤±0.5% |
Stabilized Current Precision | ≤±1%(output current 20%~100% rated current) |
Ripple Voltage Peak Value | ≤1% |
Current Sharing Imbalance | ≤±5% |
Battery Side | |
Voltage Range | 200Vdc~950Vdc |
Current Range | 0A~50A |
Stabilized voltage Precision | ≤±0.5% |
Stabilized Current Precision | ≤±1%(output current 20%~100% rated current) |
Ripple Voltage Peak Value | ≤1% |
Current Sharing Imbalance | ≤±5% |











