HPA-G53(2400-2500MHz)
Amplify RF Signal
Pull Core
New
RoHS, ISO, CE
12 Months
Manual
It Depends
Electric
300,000-1,000,000 Shots
2400-2500MHz
200W
50dB
Ldmos
Cw
Yonlit
Carton by Air
180*150*25mm
China
8501510010
Product Description
200W WiFi 2400-2483MHz RF Amplifier
| Item | Requirements | |
| Frequency Range | 2400-2500 MHz | |
| Gain(Small Signal) | ≥50dB± 3dB | |
| In-Band Ripple | ≤2dB | |
| Input Signal Range | 5-15dBm | |
| RF Input Signal | CW | |
| RF Output Power | ≥53dBm | |
| Gain Adjust Range | 0-31dB, 1dB Step | |
| Input/Output VSWR | ≤1.5 | |
| Working Voltage | 28VDC | |
| Working Current | ≤22A(Full Power) | |
| RF Input Port | 50 Ohms SMA-Female | |
| RF Output Port | 50 Ohms N--Female | |
| Power Supply Interface | 2W2-Male or | |
| Dimension | About 180x150x25mm ( Exclusive Connector) | |
| Working Temperature | -25 to 65ºC | |
| I/o Port | RS485 (DB9-M) (Option) | RS485 (With free PC software) |
| Setting: ON/OFF, ATT, Gain, Alarm Temperature, Alarm VSWR; | ||
| Monitoring: RF Power, VSWR, Temperature, ATT, Gain, Alarms | ||
| PIN1,PIN2: RS485A; PIN3,PIN4: RS485B | ||
| Parallel (DB15-F) | PIN1:2dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: ATT) | |
| PIN2:2dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: ATT) | ||
| PIN3:4dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: ATT) | ||
| PIN4: 8dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: ATT) | ||
| PIN5:16dB Attenuation (Hang in air or add 5VDC: No ATT; Grounding: ATT) | ||
| PIN7: V/L (Reflected RF Power, Max voltage,3.3V; 0.1V/1dBm @25ºC ) | ||
| PIN10:P/L (Output RF Power; Max voltage,3.3V; 0.1V/1dBm @25ºC) | ||
| PIN11: LE : High Level(5V) or hang in air:: OFF; Low Level(0V) ON | ||
| PIN12: Alarm over High-Temperature(80+/-2ºC) and shutdown, Auto Restart @ 55ºC+/-2ºC | ||
| PIN13: Alarm over High-VSWR, Auto-restart after 30s. | ||
| PIN14: T/L Temperature Monitor = 0.01*Tc(ºC)+0.5 (V) (Tc=Case temperature) | ||
| PIN15: GND | ||
