16mm Formwork Tie Rod Tie Nut Combination Wing Nut with Plate

Tie Rod 16mm Formwork Wing Nut Tie Rod Tie Nut                 

The Formwork Tie Rod system components include the Tie Rod,Tie Nut,Wing Nut,
Anchor Nut, Water Barrier/Water Stop, Washer Plate/Waller Plate, Steel Cone, 
Plastic Tube and Cone and some European countries also asked for the Flupp Plug 
( Rubber Stop). Wing nuts and Tie rods as a whole facility are used widely in formwork
construction system. 

Ductile Iron Casting Formwork Wing Nut
	Material	Ductile Iron Casting	Packing	Bags or Pallets
	Diameter	D15mm D20mm	Ultimate  Load	Over 180kn
	Feature	One Arm Two Arms	Color	Gold, Silver or Black
	Surface Treatment	Galvanized or as Nature	Capacity	300tons per month
	Application	Formwork Tie Rod System	Related Products	Tie Rod, Wing Nut, Climbing Steel Cone Nut, Hex Nut and etc.
	OEM Design is Acceptable

Formwork Cold Rolled Tie Rod
	Material	Q235, 45# Steel, Special mixture Steel
	Diameter	D12mm/ D15mm/ D20mm
	Weight	0.75kg/meter (D12mm) 1.50kg/meter (D15mm) 2.32kg/meter (D20mm)
	Ultimate Load	70kn-260kn
	Surface Treatment	Galvanized or as Nature
	Packing	Bundles
	Related Products	Tie Nut, Wing Nut, Water Stop, Climbing Cone Nut, Hex Nut and etc.

Formwork Hot Rolled Tie Rod
	Material	Special mixture Steel
	Diameter	DW15mm
	Weight	1.42kg/meter
	Ultimate Load	180kn-190kn
	Surface Treatment	Galvanized or as Nature
	Packing	Bundles
	Related Products	Tie Nut, Wing Nut, Water Stop, Climbing Cone Nut, Hex Nut and etc.

Ductile Iron Casting Formwork Tie Nut Details
	Material	Ductile Iron Casting	Packing	Bags or Pallets
	Diameter	D12mm D15mm D20mm	Ultimate  Load	Over 180kn
	Plate Size	D70mm D80mm D90mm D100mm D120mm	Color	Gold, Silver or Black
	Surface Treatment	Galvanized or as Nature	Capacity	300tons per month
	Application	Formwork Tie Rod System	Related Products	Tie Rod, Wing Nut, Climbing Steel Cone Nut, Hex Nut and etc.
	OEM Design is Acceptable

Ductile Iron Casting Formwork Combi Plate Nut/Square Slope Nut
	Material	Ductile Iron Casting	Packing	Bags or Pallets
	Diameter	D15mm	Ultimate Load	Over 180kn
	Feature	Round Plate or Square Plate	Color	Gold, Silver or Black
	Surface Treatment	Galvanized or as Nature	Capacity	300tons per month
	Application	Formwork Tie Rod System	Related Products	Tie Rod, Wing Nut, Climbing Steel Cone Nut, Hex Nut and etc.
	OEM Design is Acceptable

Ductile Iron Casting Formwork Hex Nut
	Material	Ductile Iron Casting		Packing		Bags or Pallets
	Diameter	D15mm		Ultimate Load		Over 180kn
	Feature	One Arm Two Arms		Color		Gold, Silver or Black
	Surface Treatment	Galvanized or as Nature		Capacity		300tons per month
	Application	Formwork Tie Rod System		Related Products		Tie Rod, Wing Nut, Climbing Steel Cone Nut, Hex Nut and etc.
	OEM Design is Acceptable
Machining Weldable Formwork Hex Nut Connector
	Material		45# Steel		Packing		Bags or Pallets
	Diameter		D15mm D20mm		Color		Black,Silver or Gold
	Surface Treatment		Galvanized or Black		Application		Concrete Formwork
	Related Products		Tie Rod, Tie Nut, Water Stop, Washer Plate
	OEM Sizes are Available

Formwork Tie Rod Washer Plate/Waler Plate
	Material	Carbon Steel	Packing	Bags or Boxes
	Size	100x100mm 100x130mm 120x120mm	Thickness	4.0-20.0mm
	Surface Treatment	Galvanized or as Nature	Capacity	300tons per month
	Application	Formwork Tie Rod System	Related Products	Tie Rod, Wing Nut, Climbing Steel Cone Nut, Hex Nut and etc.
	OEM Design is Acceptable

Photos of Combination Plate Nut 

Packing & Shipping:

The Concrete Formwork Tie Rod System is used with various formwork accessories in
concrete construction. This system includes Tie Rods, Formwork Wing Nuts, Concrete Anchor 
Nuts, Hex Nuts, Connection Nuts, etc.
Formwork Accessories Formwork Clamps
Spring Clamps, Formwork Rapid Clamps, Formwork Wedge Clamp, Spring Clips
and Rapid Tensioners.
Steel Prop System is a system of structural members used temporarily to support loads
during construction. The forces arising from these loads must be fully resolved, using props or
columns to provide all the support needed for the work under construction, such as beams, 
formwork, etc.  We supply prop sleeve, prop nut, base plate, G Pin, Fork Head, Tripod and
whole set of shoring prop

PP Hollow Plastic Formwork Shuttering Sheet, which is designed to
replace the traditional Plywood

1. It can be REUSED at least 60-100 times per sheet, NO oil needed

2. It can be easily CUT, NAIL and SCREW

3. It is 100% Waterproof

4. Saving at least 30% total cost by using it

NEW Design Round Hole PP Hollow Plastic Formwork
	Size	Weight	Qty/20GP	Qty/40GP
	1220x2440x12mm	21kgs	600pcs	1200pcs
	1220x2440x14mm	24kgs	540pcs	1080pcs
	1220x2440x15mm	25kgs	480pcs	960pcs
	1220x2440x16mm	27kgs	440pcs	880pcs
	1220x2440x18mm	31kgs	400pcs	800pcs
	1220x2440x20mm	33kgs	360pcs	720pcs
More Sizes Are Available

TRICO offering the products:

• Formwork Tie Rod System
• Aluminium Formwork Wall Tie System
• Scaffolding System
• PP Hollow Plastic Formwork
• Steel Formwork Panel with Plywood Forming System
• Other Plastic Building Materials

1. Quality: Strictly control the quality through three levels. First level, quality test on the producing line.
   Second level, quality test during warehousing. Third level, quality test before loading.

2. Timeliness: 24 hours online.Provide consulting and quotation services for customers all the time.

3. Veracity: Strictly follow the customer standard to ensure the tolerance range and meet customer's 
  requirement.

4. Integrity: If The customer complains about the quality of the products, our company will actively 
   cooperate with them to solve the problem. If it is the responsibility of our company, we will bear  the      
   corresponding responsibility and compensation.

5. Longevity: Establish good long-term relationship with customers.