DM-8203
1100ust
Diameter 127mm
Front Loading
H13
Rexroth
12s
380V
50Hz
dynamax
Wooden Box and Paper Box
7000x2300x3000
Foshan
Product Description
1100MT (1200UST) Extrusion Press Technical Parameters
Electrical Parts:
PLC: Mistubishi FX3U-128MR,
Mistubishi 10.4" LCD touch screen displaying press situation and extrusion speed
Equipped with automatic hydraulic digital controlled system, this press has functions
of :
a) display of set speed and actual speed
b) same speed controlled and speed changed control
c) display of set electric current and actual electric current
d) actual position, speed changed position and after extrusion position
e) switches group position setting
f) break-through pressure testing
g) timing showing parameters.
h) system working parameters setting
B.This press is equipped with MTS Temposonics sensor (made in the U.S.) and data display and adjustment. Under automatic situation, extrusion speed can also be adjusted.
| Diameter of main cylinder piston: | 750mm |
| Diameter of side cylinder piston: | 180mm*2 pieces |
| Diameter of container piston: | 160mm*4 pieces |
| Diameter of shear piston: | 140mm |
| Total extrusion strength: | 220kg/cm2 1083MT |
| Main cylinder extrusion: | 220kg/cm2 971 MT |
| side cylinder extrusion: | 220kg/cm2 112 MT |
| container lock-up: | 200/kg /cm2 160 MT |
| shear: | 160/kg/ cm2 25 MT |
| main cylinder fast forwarding speed: | 300mm/sec |
| main cylinder fast draw-back speed: | 200mm/sec |
| extrusion speed: | 0~11.6mm/sec |
| container lock-up: | 190mm/sec |
| container open: | 125mm/sec |
| shear down: | 350mm/sec |
| shear up: | 400mm/sec |
| Dead cycle is less than 20 seconds. |
| main cylinder: | 35# forged steel (entire piece) |
| main piston: | chilled cast iron |
| front plate: | 35# forged steel (450mm) |
| Die stack: | 45# forged steel |
| Crosshead: | 35# forged steel |
| tie rod: | 45# forged steel (¢210mm), with pre-stressed sleeve |
| Container housing: | Q345 steel structure |
| Container tire: | 5crmnmo |
| container liner: | H13 forged steel |
| stem: | H13 forged steel |
| Dummy block: | H13 forged steel |
| bottom shelf: | 35# H steel and steel plate welding |
Electrical Parts:
PLC: Mistubishi FX3U-128MR,
Mistubishi 10.4" LCD touch screen displaying press situation and extrusion speed
Equipped with automatic hydraulic digital controlled system, this press has functions
of :
a) display of set speed and actual speed
b) same speed controlled and speed changed control
c) display of set electric current and actual electric current
d) actual position, speed changed position and after extrusion position
e) switches group position setting
f) break-through pressure testing
g) timing showing parameters.
h) system working parameters setting
B.This press is equipped with MTS Temposonics sensor (made in the U.S.) and data display and adjustment. Under automatic situation, extrusion speed can also be adjusted.
