JT-10
Self-priming Pump With Inner Recirculation
Diesel Engine
Jet-flow
Direct Connection Transmission
The Slide
Cast Iron or Stainless Steel
Cast Iron or Stainless Steel
End Suction Centrifugal Pump
Mechanical Seal
Water Cooler Engine
76mm
6.7m
Trailer, Silence-Box, Control Panel, Fuel Tank,etc
650-1600rpm
Pump Casing, Impeller, Seal, Coupling, Bearing,etc
Y&L
Standard Plywood Case
10 inch
Shanghai, China
8413709990
Product Description
120 hp Self Priming Centrifugal Diesel Engine Slurry Pump
Feature of self Priming pump
1.Outstanding Self Priming Performance
Ultra strong self priming performance enables this pump to be installed above the liquid level. Long drive shaft, hanging bracket and other devices are not required. What it only requires is to put suction pipe into the sewage. In first use, you only need to fill up the pump chamber with liquid to complete initial self priming. Then, the sewage pump can automatically conduct self priming, thus dramatically reducing installation time and maintenance cost.
2.Nearly Zero Clogging
Semi-open impeller design allows relatively large size solids and super long fiber to pass through the wastewater pump.The maximum diameter of solid particles is up to 3 inch . Even if it is clogged, the manual discharge port installed at the front of the pump can be easily opened to clear up the pump in few minutes.
3.Simple, Quick and Economical Maintenance
If you want to inspect or change impeller, machine seal, wear plate or other accessories, the only think you need to do is to open the front cover and take out the r rotating assembly without having to diamantle the pipeline or pump.
Application
1. Seriously polluted water discharge
2. Subsurface drainage or mine water drainage
3. Centralized and staged diaposal system of urban sewage disposal plants
4. Severe industrial and commercial sewage treatment
5. Sewage discharge in hospitals, hotel.etc
Technical Parameters
| Model | Rotation Speed | Flow Rate (Q) | Head (H) | Power (P) | Inlet&outlet size | Max. Solid | Max. Suction Lift | ||
| rpm | m3/h | I/s | m | KW | HP | mm | mm | m | |
| JT-10 | 650 | 250 | 69 | 5 | 11 | 15 | 250(10) | 76 | 2.1 |
| 750* | 300 | 83 | 6.5 | 15 | 20 | 3.4 | |||
| 850 | 350 | 97.0 | 8.8 | 22 | 30 | 4.3 | |||
| 950* | 400 | 111 | 10.3 | 30 | 41 | 5.2 | |||
| 1050 | 450 | 125.0 | 12.5 | 45 | 61 | 5.5 | |||
| 1150 | 500 | 139 | 16 | 55 | 75 | 5.5 | |||
| 1250 | 525 | 146 | 19 | 75 | 102 | 5.8 | |||
| 1350 | 550 | 153.0 | 23 | 90 | 122 | 6.7 | |||
| 1450* | 600 | 167 | 26.5 | 90 | 122 | 6.7 | |||
| 1600 | 700 | 194.5 | 28 | 90 | 122 | 6.7 | |||
Performance Curve
Structure Picture
Our Service
Delivery: Delivery time will be on time as the contact. Usually, the delivery time is of centrifugal pump is for 15-25 working days.
Warranty: 1 year for the pump body, 3 months for the main working parts.
Package:According to your quantity, we use plywood case which is durable for ocean transport.
Shipping: By Sea and By Air
Payment: We are accept T/T,L/C,West Union and so on.
Pre-sales Service:According to your requirement, we will give your our profession advice of pump solution.
On-sales Service:We will clearly show you everything in fact when you place an order with us. We will takes photos or videos to show you order production situation.
After-sales Service: We will full report you the production progress and plan. Meanwhile, we will follow up the pump working conditions per three months when the pumps put into use, and can send the spare parts to you within one week if you need.
About Us
Shanghai Y&L Pump Co.,Ltd was found in 2002, which is located in Shanghai. We producing water pumps for more than 10 years, especially self priming pump, diesel engine pump and diaphragm pump. We have an office in Wenzhou which called Wenzhuo Defu Machinery Co.,Ltd.
