(H)GW9
High-voltage
Three-column Disconnector
Outdoor High-voltage
Electric
Grounding
Horizontal Rotary Type
Three Pole
Electric
ISO, IS9001, ISO9002, ISO2000
50Hz
12kv
630(1250)a
20(25)/4ka/S
DGG
Export Box
China
853530900
Product Description
Our factory
We are professional manufacturer of current transformer ,voltage transformer, Vacuum Circuit Breakers/Recloser,Isolation switches,Dropout Fuse Cut-out,Lightning Arresters,High and Low Voltage Cabinets,Metering Devices,Power Distribution Transformers etc.
General
The "(H)GW9-12" outdoor high voltage switch equipment of single phase AC 50Hz.The product is suitable for power systems with a rated voltage of 10kV to make or break power supply under circumstances of voltage and no load. The isolator adopts an isolated hook rod to operate.
Service conditions
1. The altitude does not exceed 1000m.
2. The ambient air temperature: Maximum:+40ºC; Minimum:-30ºC, Paramos:-40ºC
3. The wind pressure does not exceed 700Pa.(corresponding to 34m/s wind speed).
4. The earthquake intensity does not exceed 8 degrees.
5. The working situation hasn't frequent violent vibration.
6. The installation site of an ordinary type isolator should be kept away from gas, smoke chemical deposition,salt-spray fog, dust, and other explosive and corrosive matters that affect seriously the insulation and conduction capability of the isolator.
7. Pollution-proof type isolator is applied to severe filthy conduction area; however, it shouldn't be any explosive matters and matters causing a fire.
Test Reports
All products have undergone professional testing and certification.
Photos of Product
We are professional manufacturer of current transformer ,voltage transformer, Vacuum Circuit Breakers/Recloser,Isolation switches,Dropout Fuse Cut-out,Lightning Arresters,High and Low Voltage Cabinets,Metering Devices,Power Distribution Transformers etc.
General
The "(H)GW9-12" outdoor high voltage switch equipment of single phase AC 50Hz.The product is suitable for power systems with a rated voltage of 10kV to make or break power supply under circumstances of voltage and no load. The isolator adopts an isolated hook rod to operate.
Service conditions
1. The altitude does not exceed 1000m.
2. The ambient air temperature: Maximum:+40ºC; Minimum:-30ºC, Paramos:-40ºC
3. The wind pressure does not exceed 700Pa.(corresponding to 34m/s wind speed).
4. The earthquake intensity does not exceed 8 degrees.
5. The working situation hasn't frequent violent vibration.
6. The installation site of an ordinary type isolator should be kept away from gas, smoke chemical deposition,salt-spray fog, dust, and other explosive and corrosive matters that affect seriously the insulation and conduction capability of the isolator.
7. Pollution-proof type isolator is applied to severe filthy conduction area; however, it shouldn't be any explosive matters and matters causing a fire.
| Technical parameters | ||||
| No. | Item | Unit | Data | |
| 1 | Rated frequency | Hz | 50 | |
| 2 | Rated voltage | kV | 12 | |
| 3 | Rated current | A | 630(1250) | |
| 4 | Rated short-time withstand current and duration | kA/s | 20(25)/4 | |
| 5 | Rated peak withstand current | kA | 50(63) | |
| 6 | Rated short-time power frequency withstand voltage | Interphase, to earth(dry) | kV/min | 42/1 |
| Interphase, to earth(wet) | 30/1 | |||
| Break(dry) | 48/1 | |||
| Break(wet) | 36/1 | |||
| 7 | Rated lightning impulse withstand voltage | Interphase, to earth | kV | 75 |
| Break | 85 | |||
| 8 | Circuit resistance | μΩ | ≤80 | |
| 9 | Mechanical life | Times | 3000 | |
| 10 | Pollution grade | e class | ||
| 11 | Creepage distance | mm | ≥372 | |
| Note: If the altitude is over 1000m, the rated insulation level should be modified as appropriate. | ||||
Test Reports
All products have undergone professional testing and certification.
Photos of Product
