1060nm ASE Broadband Laser Source
Fiber Transceiver
ODF
ISO, RoHS
New
Customized
100% Testing Before Shipping
ZG
Box
Small
Mianyang, China
Product Description
Introduction
Fiber ASE wideband light source module adopts spectral flattening technology, and has high output power. Its working wavelength covers C+L band, which is suitable for fiber sensing applications. RS-232 interface and upper computer software can be provided to facilitate the monitoring of the status of the light source module.
Features
Stable power
Flat spectrum
Remote monitoring
Applications
Fiber sensing
Medical imaging
Fiber optic device testing
Note:
Output power and flatness can be customized according to customer requirements;
The stability test environment is 25ºC after 10 minutes of product preheating.
Ordering information
Fiber ASE wideband light source module adopts spectral flattening technology, and has high output power. Its working wavelength covers C+L band, which is suitable for fiber sensing applications. RS-232 interface and upper computer software can be provided to facilitate the monitoring of the status of the light source module.
Features
Stable power
Flat spectrum
Remote monitoring
Applications
Fiber sensing
Medical imaging
Fiber optic device testing
| Parameters | Unit | Typ. | Notes |
| Covering the wavelength | nm | 1030~1080 | 50nm@10dB |
| Output power | mW | 10/20/200 | Constant power |
| Spectral flatness | dB | 10 | |
| Isolation degree of output | dB | 45 | |
| Short-time stability(15 min) | dB | ≤ 0.02 | |
| Long-term stability(8 h) | dB | ≤ 0.05 | |
| Degree of polarization | DOP | ≤ 0.2 | |
| Type of pigtail fiber connector | - | FC/APC | |
| Pigtail type | - | Hi1060 | |
| Operating temperature | °C | -20 ~ +65 | |
| Storage temperature | °C | -40 ~ +85 | |
| Power supply mode | - | DC 5V OR AC 220V | |
| Size | mm | Benchtop260×285×115 | Module 90(W)×70(D)×15(H) |
| Communication protocol | - | RS232 | Optional power adjustment and PC software |
Output power and flatness can be customized according to customer requirements;
The stability test environment is 25ºC after 10 minutes of product preheating.
Ordering information
| ZG | Wavelength range | Output power | Diameter of pigtail casing | Fiber length | Connector | Packaging Type |
| 1060=1060nm | 10= 10mW | 9-0.9mm | 0=Flange | 0=None | B=Benchtop | |
| 20= 20mW | 2-2mm | 1 =1M | 1=FC/APC | M=Module | ||
| 100=100mW 200=200mW | 2 =2M | 2=FC/PC |
