YZYX140CJ
Including Technical Guidance, Supply of Vulnerable
1 Year
Horizontal
Three
380V
Yzyx140cj
9-10t/D
18.5kw
980kg
SANBANG
Export Wooden Crates
1-2 cubic meters
Henan
8479200000
Product Description
YZYX series spiral oil press
The Sanbang spiral oil press is suitable for more than 50 types of oil crops, including peanuts, soybeans, rapeseed, cottonseed, sesame seeds, autumn sunflower seeds, sunflower seeds, tea seeds, castor seeds, corn germ, grape seeds, mustard seeds, perilla seeds, Moringa seeds, rubber seeds, tung oil seeds, pomegranate seeds, pumpkin seeds, and grass seeds.
| TYPE | YZYX140GX | YZYX140 | YZYX140CJGX |
| Capacity | 9-11T/D | 9-11T/D | 9-11T/D |
| Motor | 18.5 or 22KW | 22KW | 22KW |
| Screw diameter | φ 140mm | φ 140mm | φ 140mm |
| Screw speed | 30-40r/min | 32-40r/min | 30-40r/min |
| Oil Content of dry cakes | <=7.6% | <=7.6% | <=7.6% |
| Weight | 1000Kg | 980Kg | 1100Kg |
| Equipment size | 2150*820*1420mm | 2150*750*1420mm | 2300*820*1420mm |
Features of Sanbang spiral oil press:
1. The screw oil press has high oil yield, strong adaptability, and can operate continuously, with a large single machine processing capacity
2. The clearance between the oil lines of the spiral oil press is small, reducing the amount of slag, increasing the pressure of the press chamber, and improving the oil output rate.
3. Dynamic pressing and squeezing, friction heating, short pressing time, fast oil delivery, Sanbang oil press;
Key points before starting up the Sanbang spiral oil press:
1. Fill the gearbox with oil before starting up
After the machine is installed, add lubricating oil according to regulations, check whether all components are tightened, whether the operating handle and insertion plate are flexible
3. Move the large pulley by hand to check if the machine is loose or stuck. If there are any abnormalities, they should be promptly eliminated
4. Adjust the tightness of the belt, start the motor, check if the direction of the groove wheel is consistent with the marked direction, and use the Sanbang oil press
5. After checking the preparation work, loosen the locking nut to tighten the screw to the dead center, then retreat 3-4 turns, and move forward half a turn to ensure the gap between the screw and the cake outlet
