Product Description
PZX Series Slurry Pump
Product Introduction
In order to meet the needs of the rapid development of mineral processing, electric power, metallurgy, coal and other industries, improve the models of slurry pumps under high head conditions, and then summarize the experience at home and abroad and the comprehensive information fed back by users, our company has developed a new generation of PZX series slurry pumps with high efficiency, large flow, high field range and multi-stage series connection by using modern advanced technology and scientific research achievements. The main features of this series of products are as follows:
This series of pumps are horizontal, single stage, single suction, cantilever and double pump casing centrifugal slurry pumps.modern CAM design method is adopted, with excellent hydraulic performance, high efficiency and low wear rate. Auxiliary impeller and packing combined sealand mechanical seal are adopted to ensure no leakage of slurry.wide flow channel, good anti blocking performance and excellent cavitation performance.
Reliability design ensures that the mean time between failures (MTBF) of the whole machine is greatly improved.
Thin oil lubrication and metric bearings shall be adopted, and the lubrication and cooling system shall be reasonably set to ensure that the bearings operate at low temperature.
The flow passage parts are made of special materials with good wear and corrosion resistance.
It can be used in series in multiple stages within the allowable pressure range, and its allowable maximum working pressure is 3.6mpa.
The transmission mode of PZX series slurry pump is mainly direct connection, and the flow head of the pump is adjusted by cutting the outer diameter of the impeller.
The pump has the advantages of few specifications and models and convenient selection.
The utility model has the advantages of reasonable structure, high efficiency, reliable operation and convenient maintenance.
Detailed Photos
Technical Parameters
| Model | Distribution power P(KW) | Flow Q(m³/h) | Head H(m) | Rotational speed n(r/min) | Efficiency η% | Cavitation allowance NPSH(m) | Impeller diameter D(mm) | Weightkg) |
| 85PZX | 30-55 | 56-120 | 61-58 | 1480 | 47-62 | 4.5-3 | 390 | 1850 |
| 11-15 | 37-76 | 25-26 | 980 | 47-62 | 2.0-1.3 | 1850 | ||
| 100PZX | 90-132 | 100-210 | 91-87 | 1480 | 48-66 | 5.2-2.7 | 485 | 2500 |
| 22-37 | 68-135 | 40-38 | 980 | 48-66 | 1.2-2.3 | 2500 | ||
| 75-90 | 93-187 | 77-73 | 1480 | 48-66 | 4.4-2.3 | 445 | 2500 | |
| 18.5-30 | 61-126 | 34-32 | 980 | 48-66 | 1.9-1.0 | 2500 | ||
| 55-75 | 82-168 | 63-59 | 1480 | 48-66 | 3.5-1.8 | 400 | 2500 | |
| 15-18.5 | 55-115 | 27-26 | 980 | 48-66 | 1.5-0.8 | 2500 | ||
| 150PZX | 132-200 | 209-420 | 93-85 | 1480 | 57-78 | 6-2.6 | 500 | 3000 |
| 37-75 | 139-278 | 40-37 | 980 | 57-78 | 2.7-2.1 | 3000 | ||
| 90-160 | 187-378 | 78-68 | 1480 | 57-78 | 4.9-2.1 | 450 | 3000 | |
| 30-45 | 125-252 | 33-30 | 980 | 57-78 | 2.1-1.1 | 3000 | ||
| 75-110 | 168-336 | 59-55 | 1480 | 57-78 | 3.8-1.7 | 400 | 3000 | |
| 18.5-30 | 110-230 | 26-24 | 980 | 57-78 | 1.7-0.8 | 3000 | ||
| 200PZX | 185-315 | 360-720 | 92-86 | 980 | 53-78 | 3.8-2.7 | 740 | 3450 |
| 90-160 | 272-544 | 52-49 | 740 | 53-78 | 2.2-1.5 | 3450 | ||
| 160-250 | 328-656 | 80-74 | 980 | 53-78 | 3.3-2.3 | 685 | 3450 | |
| 75-110 | 252-505 | 46-42 | 740 | 53-78 | 1.9-1.3 | 3450 | ||
| 110-200 | 305-610 | 67-64 | 980 | 53-78 | 2.8-1.1 | 630 | 3450 | |
| 55-90 | 233-466 | 38-36 | 740 | 53-78 | 1.6-0.6 | 3450 | ||
| 250PZX | 355-450 | 600-1000 | 96-92 | 980 | 76-63 | 6.7-2.7 | 740 | 4000 |
| 160-250 | 475-870 | 55-53 | 740 | 76-63 | 3.8-1.5 | 4000 | ||
| 280-400 | 560-950 | 81-77 | 980 | 76-63 | 60.-2.4 | 700 | 4000 | |
| 132-200 | 450-839 | 48-46 | 740 | 76-63 | 3.4-1.4 | 4000 | ||
| 220-250 | 519-940 | 68-64 | 980 | 76-63 | 5.0-2.0 | 640 | 4000 | |
| 110-160 | 389-800 | 41-39 | 740 | 76-63 | 2.9-1.1 | 4000 | ||
| 300PZX | 500-560 | 704-1408 | 95-85 | 980 | 78-63 | 7.3-3.3 | 740 | 4500 |
| 185-250 | 524-1050 | 54-49 | 740 | 78-63 | 4.2-1.9 | 4500 | ||
| 355-450 | 648-1296 | 82-74 | 980 | 78-63 | 7.1-3.0 | 700 | 4500 | |
| 160-200 | 493-985 | 47-44 | 740 | 78-63 | 4.0-1.7 | 4500 | ||
| 250-355 | 597-1193 | 69-64 | 980 | 78-63 | 5.5-2.5 | 645 | 4500 | |
| 110-160 | 453-907 | 40-36 | 740 | 78-63 | 3.1-1.4 | 4500 | ||
| 350PZX | 450-710 | 960-1919 | 95-86 | 980 | 81-68 | 6.9-3.5 | 760 | 5500 |
| 200-355 | 724-1450 | 54-49 | 740 | 81-68 | 3.9-2.0 | 5500 | ||
| 355-560 | 888-1775 | 82-73 | 980 | 81-68 | 5.9-3.0 | 703 | 5500 | |
| 160-280 | 640-1341 | 42-46 | 740 | 81-68 | 3.4-1.7 | 5500 | ||
| 280-500 | 816-1632 | 69-62 | 980 | 81-68 | 5.0-2.5 | 646 | 5500 | |
| 132-220 | 616-1232 | 39-35 | 740 | 81-68 | 2.9-1.4 | 5500 |
Product Diagram
Certificates
WorksWorkshophop
Workshop
Product Accessories
Application
Product Transportation
FAQ
1. What Products does Pansto Pump mainly produce?
Pansot mainly produce horizontal slurry pumps, vertical slurry pumps, rubber lined pumps, gravel sand pumps, froth pumps, desulfurization pumps, filter press feed pumps, dredge pumps, sewage pumps, submersible slurry pumps and spare parts.
2. Is Pansto direct factory or trader?
Yes, Pansto is direct Slurry Pump Manufacturer with Export and Import License, having its own foundry workshop, Machining Workshop, Heat treatment equipment and Assembly workshop, also advanced quality inspection equipment.
3. Can you provide OEM, ODM service?
Yes. OEM Service is an important part of our business. Pansto Pump accept OEM business as samples or drawings of all kinds of pumps and casting spare parts. And more we offer ODM service too.
4. What is your warranty period?
We provide one year of unconditional warranty on our products for the manufacturing defects.
5. What about delivery time?
Normally our production time is within two weeks. Please confirm before order.
6. The Min MQQ?
The MQQ is one pcs pump or spare parts.
Welcome to Contact Us!
