TAFA 75B
Electronics, Industrial
GB
Nial
Nickel Wire
Not Powder
Nial 955/Ni95al5/Thermal Spray Alloy Wire
Bright,Soft
1.6mm
Ualloy
Ualloy
Be Packed Into Plywood Pallet or Wooden Case
Hangzhou, China
75052200
Product Description
1.6mm Nickel Based Welding TAFA 75B/NiAl 955 Thermal Spray Wire
(Common name:NiAl 95-5, Nickel Aluminum 95/5,N9,Ni95Al5,95/5 Nickel Aluminum,F-80NA Nickel Aluminium 95/5)
This alloy is a nickel aluminium alloy characterized by dense coating,high temperature oxidation resistance, heat shock resistance and scratch resistance.This wire has stable chemical composition, low oxgen and high bonding strength.
Typical applications for NiAl 95/5 are widely used in arc and flange flame spray systems, Coatings to resist heat and prevent scaling of conventional low alloy steels,Bond coats for improving the adhesion of top coatings,Coatings on moulds in the glass industry.
Typical Deposit Characteristics
Style of supply
Wire:the common sizes are 1.6mm and 2.0mm,the spool size is DIN 300,and the weight per spool is about 10-15kgs.The other sizes are on the request of our customers.
| Item name | 1.6mm Nickel Based Welding TAFA 75B/NiAl 955 Thermal Spray Wire |
| Item No | 955W16B |
| Condition | Bright,soft |
| Conductor Dimension | 1.6mm |
| Density | 8.2g/cm3 |
| Length | 60.7m/kg for 1.6mm |
| Weight | 15kgs per spool |
| Package | DIN 300,then packed cartons+wooden cases |
(Common name:NiAl 95-5, Nickel Aluminum 95/5,N9,Ni95Al5,95/5 Nickel Aluminum,F-80NA Nickel Aluminium 95/5)
This alloy is a nickel aluminium alloy characterized by dense coating,high temperature oxidation resistance, heat shock resistance and scratch resistance.This wire has stable chemical composition, low oxgen and high bonding strength.
Typical applications for NiAl 95/5 are widely used in arc and flange flame spray systems, Coatings to resist heat and prevent scaling of conventional low alloy steels,Bond coats for improving the adhesion of top coatings,Coatings on moulds in the glass industry.
Normal composition%
| Al | Mn | Fe | Ni | Si | Cu | C | Ti |
| 4.5-5.5 | Max 0.3 | Max 0.3 | Bal. | Max 0.5 | Max 0.08 | Max 0.005 | Max 0.3 |
Typical Physical properties
| Density (g/cm3) | 8.2 |
| Electrical resistivity at 20ºC(mm2/m) | 0.42 |
Typical Deposit Characteristics
| Coating Harness | Coating Strength | Deposit Rate | Deposit Efficiency | Machilityineab |
| 23-25 HRC | 65-68Mpa | 10 lbs /hr/100A | 60-70% | Good |
| Specific heat capacity |
| Melting point (ºC) | 1010 |
| Max continuous operating temperature in air (ºC) | 800 |
| Magnetic properties | non-magnetic |
Style of supply
Wire:the common sizes are 1.6mm and 2.0mm,the spool size is DIN 300,and the weight per spool is about 10-15kgs.The other sizes are on the request of our customers.
