We need a Garmin eTrex 10 or equivalent.
Regards
MadeinChina Team
Jun 30, 2026 at 4:00 AM Reply
Dear Hamza,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied Hamza
- Jun 30, 2026 at 3:56 AM Tajikistan
Dear Sir/ Madam,
We need a Garmin eTrex 10 or equivalent.
Regards
MadeinChina Team
Jun 30, 2026 at 4:00 AM Reply
We need a Garmin eTrex 10 or equivalent.
Regards
MadeinChina Team
Jun 30, 2026 at 4:00 AM Reply
- has replied Yuke Wang
- Jun 30, 2026 at 3:49 AM United States
Hi Wuhan Vanz Trade Co.
I am a personal buyer from United States and I would like to buy 10 grams of 17-beta estradiol from you guys. If possible, I would like to know the price of the product itself (10 grams), the shipping cost of sea transport, and the customs—essentially, the total cost I would need to cover for the entire process. Thank you, thank you so much.
MadeinChina Team
Jun 30, 2026 at 4:00 AM Reply
I am a personal buyer from United States and I would like to buy 10 grams of 17-beta estradiol from you guys. If possible, I would like to know the price of the product itself (10 grams), the shipping cost of sea transport, and the customs—essentially, the total cost I would need to cover for the entire process. Thank you, thank you so much.
MadeinChina Team
Jun 30, 2026 at 4:00 AM Reply
Dear Yuke,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied Conrad Perez
- Jun 30, 2026 at 3:30 AM United States
Looking for a peptide manufacturer
MadeinChina Team
Jun 30, 2026 at 4:00 AM Reply
MadeinChina Team
Jun 30, 2026 at 4:00 AM Reply
Dear Conrad,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied René Doré
- Jun 30, 2026 at 3:06 AM United States
Hello Vincent,
Following my review of the H-MG35i specifications, I confirm this model is technically suitable for my application (Princess V65 refit, Le Marin marina, Martinique — French territory, EU standards).
I am ready to proceed with a serious order. Before confirming, I need answers to the following points:
---
**1. CE MARINE CERTIFICATION — CRITICAL**
Martinique is a French overseas territory under EU regulations. Import requires a valid CE marine certificate nominatively issued for the H-MG35i.
— Do you have a CE marine certificate for this exact model?
— Please provide the certificate number, issuing body, and scope
— This must be a nominative CE certificate for the H-MG35i specifically — not a nameplate substitution or generic company certificate
---
**2. YANMAR ENGINE — ORIGINAL CONFIRMATION**
— Please confirm the 4TNV88 is a genuine original Yanmar engine (not a clone)
— Please provide the Yanmar engine serial number format for traceability
---
**3. PRICING**
I noticed the listed price is $6,100 FOB Zhejiang. Could you offer a better price for this order? Please also confirm the CIF price to Fort-de-France port, Martinique.
---
**4. WARRANTY — 2 YEARS / 2,000 HOURS**
The listing shows 1 year warranty only. Most of your competitors offer 2 years / 2,000 hours warranty as standard on marine generators. I would like the same terms — 2 years or 2,000 hours warranty, whichever comes first, covering all components including the PMGi 35 inverter module and DDC control board.
---
**5. SPARE PARTS — PERMANENT STOCK AVAILABILITY**
In case of failure after warranty, I plan to order spare parts via DHL express. I need confirmation that the following parts are permanently kept in stock and can be shipped immediately worldwide:
— PMGi 35 inverter module — unit price?
— DDC control board — unit price?
— Will these parts remain available for at least 10 years?
---
**6. RAW WATER PUMP — IMPELLER REFERENCE**
— Please provide the raw water pump brand, model reference, and impeller part number
— Is this a standard Jabsco/Johnson pump or a proprietary pump?
— I would like to include 4 spare impellers in the order — unit price?
---
**7. CONSUMABLE PARTS — TO ORDER WITH THE GENERATOR**
I would like to include the following Yanmar 4TNV88 consumables in the same order (2-year supply):
— Oil filter × 4 — reference and unit price?
— Fuel filter × 2 — reference and unit price?
— Air filter × 2 — reference and unit price?
— Drive belt × 2 — reference and unit price?
— Oil drain gasket × 4 — reference and unit price?
---
**8. PACKAGING AND SHIPPING**
— Confirm wooden case packaging for CIF shipment
— Estimated transit time Zhejiang → Fort-de-France?
— Production lead time after deposit payment?
---
If CE marine is confirmed and all above points are answered satisfactorily, I am ready to proceed with payment immediately.
Best regards,
René DORÉ
MadeinChina Team
Jun 30, 2026 at 4:00 AM Reply
Following my review of the H-MG35i specifications, I confirm this model is technically suitable for my application (Princess V65 refit, Le Marin marina, Martinique — French territory, EU standards).
I am ready to proceed with a serious order. Before confirming, I need answers to the following points:
---
**1. CE MARINE CERTIFICATION — CRITICAL**
Martinique is a French overseas territory under EU regulations. Import requires a valid CE marine certificate nominatively issued for the H-MG35i.
— Do you have a CE marine certificate for this exact model?
— Please provide the certificate number, issuing body, and scope
— This must be a nominative CE certificate for the H-MG35i specifically — not a nameplate substitution or generic company certificate
---
**2. YANMAR ENGINE — ORIGINAL CONFIRMATION**
— Please confirm the 4TNV88 is a genuine original Yanmar engine (not a clone)
— Please provide the Yanmar engine serial number format for traceability
---
**3. PRICING**
I noticed the listed price is $6,100 FOB Zhejiang. Could you offer a better price for this order? Please also confirm the CIF price to Fort-de-France port, Martinique.
---
**4. WARRANTY — 2 YEARS / 2,000 HOURS**
The listing shows 1 year warranty only. Most of your competitors offer 2 years / 2,000 hours warranty as standard on marine generators. I would like the same terms — 2 years or 2,000 hours warranty, whichever comes first, covering all components including the PMGi 35 inverter module and DDC control board.
---
**5. SPARE PARTS — PERMANENT STOCK AVAILABILITY**
In case of failure after warranty, I plan to order spare parts via DHL express. I need confirmation that the following parts are permanently kept in stock and can be shipped immediately worldwide:
— PMGi 35 inverter module — unit price?
— DDC control board — unit price?
— Will these parts remain available for at least 10 years?
---
**6. RAW WATER PUMP — IMPELLER REFERENCE**
— Please provide the raw water pump brand, model reference, and impeller part number
— Is this a standard Jabsco/Johnson pump or a proprietary pump?
— I would like to include 4 spare impellers in the order — unit price?
---
**7. CONSUMABLE PARTS — TO ORDER WITH THE GENERATOR**
I would like to include the following Yanmar 4TNV88 consumables in the same order (2-year supply):
— Oil filter × 4 — reference and unit price?
— Fuel filter × 2 — reference and unit price?
— Air filter × 2 — reference and unit price?
— Drive belt × 2 — reference and unit price?
— Oil drain gasket × 4 — reference and unit price?
---
**8. PACKAGING AND SHIPPING**
— Confirm wooden case packaging for CIF shipment
— Estimated transit time Zhejiang → Fort-de-France?
— Production lead time after deposit payment?
---
If CE marine is confirmed and all above points are answered satisfactorily, I am ready to proceed with payment immediately.
Best regards,
René DORÉ
MadeinChina Team
Jun 30, 2026 at 4:00 AM Reply
Dear René,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied AK
- Jun 30, 2026 at 2:27 AM Netherlands
Retatruide. Contact me on whatsapp thanks.
MadeinChina Team
Jun 30, 2026 at 4:00 AM Reply
MadeinChina Team
Jun 30, 2026 at 4:00 AM Reply
Dear AK,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied Thijs D'Hauwe
- Jun 30, 2026 at 1:31 AM Belgium
您好！
我是来自比利时的一位农民，对贵公司的 6 台畜牧循环风机 很感兴趣。
请问贵公司可以出口并运输到比利时吗？
如果购买 6 台风机，请问总价格是多少？请同时告知运费、交货时间以及付款方式。
期待您的回复！
此致
敬礼！
Thijs D'Hauwe
MadeinChina Team
Jun 30, 2026 at 2:00 AM Reply
亲爱的 Thijs：
我们已通知供应商尽快与您联系，请查收您的电子邮件。
顺颂商祺，
MadeinChina 客户服务团队
我是来自比利时的一位农民，对贵公司的 6 台畜牧循环风机 很感兴趣。
请问贵公司可以出口并运输到比利时吗？
如果购买 6 台风机，请问总价格是多少？请同时告知运费、交货时间以及付款方式。
期待您的回复！
此致
敬礼！
Thijs D'Hauwe
MadeinChina Team
Jun 30, 2026 at 2:00 AM Reply
亲爱的 Thijs：
我们已通知供应商尽快与您联系，请查收您的电子邮件。
顺颂商祺，
MadeinChina 客户服务团队
- has replied Lisa
- Jun 30, 2026 at 1:24 AM Sweden
Hello,
I am interested in your machines.
I have a few important requirements:
I need large capsule vending machines (around 150–170 cm height preferred)
Motor-driven dispensing system
Capsule size: standard 45–100 mm (please confirm available sizes)
I do NOT need a coin payment system
I do NOT need built-in payment system (QR / card / etc.)
The machine will be controlled by an external electronic system (ESP32 / relay trigger)
Please confirm:
Can the machine operate without the coin mechanism installed or bypassed?
Is there an external signal input (or simple button/motor trigger) available?
What voltage does the motor system use (12V or 24V)?
What is the MOQ for 2 units?
Shipping cost to Ghana (port delivery preferred)?
Can you provide OEM/customization options (logo, color, no coin system)?
We are starting with 2 units for a pilot project, with plans to scale if successful.
Thank you.
Kindly,
Lisa
MadeinChina Team
Jun 30, 2026 at 2:00 AM Reply
I am interested in your machines.
I have a few important requirements:
I need large capsule vending machines (around 150–170 cm height preferred)
Motor-driven dispensing system
Capsule size: standard 45–100 mm (please confirm available sizes)
I do NOT need a coin payment system
I do NOT need built-in payment system (QR / card / etc.)
The machine will be controlled by an external electronic system (ESP32 / relay trigger)
Please confirm:
Can the machine operate without the coin mechanism installed or bypassed?
Is there an external signal input (or simple button/motor trigger) available?
What voltage does the motor system use (12V or 24V)?
What is the MOQ for 2 units?
Shipping cost to Ghana (port delivery preferred)?
Can you provide OEM/customization options (logo, color, no coin system)?
We are starting with 2 units for a pilot project, with plans to scale if successful.
Thank you.
Kindly,
Lisa
MadeinChina Team
Jun 30, 2026 at 2:00 AM Reply
Dear Lisa,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied ANKIT KEDIA
- Jun 30, 2026 at 12:33 AM India
Dear Sales Team,
I am writing to introduce M/S. Pharmansia, an established indenting and procurement firm based in Ahmedabad, Gujarat, India. While our core operations have historically focused on sourcing and trading within the pharmaceutical sector, we are actively expanding our commercial portfolio.
We are currently diversifying into the import and domestic marketing of self-heating packaging solutions. Our extensive experience managing complex supply chains and rigorous quality standards positions us well to successfully introduce and distribute innovative packaging technologies across the Indian market.
Our immediate goal is to partner with a reliable Original Equipment Manufacturer (OEM) capable of supplying these solutions under our clients' established brand names. We have identified strong demand and are specifically targeting clients in two primary sectors:
Ready-to-Cook (RTC) Meal Brands: Focusing on convenient, on-the-go meal solutions optimized for domestic travelers.
Corporate Canteen Contractors: Catering to large-scale food service operators who hold exclusive tie-ups with corporate facilities and require efficient, heat-on-demand solutions.
Given these specific use cases, could you please review your current lineup and suggest which of your self-heating products would be the most suitable fit for our clients?
Additionally, we would appreciate it if you could provide:
Your latest product catalog and technical specifications.
Minimum Order Quantity (MOQ) requirements for OEM/private labeling.
Estimated pricing structures and lead times.
We are highly interested in establishing a long-term collaboration with your manufacturing team. I look forward to your recommendations and to discussing how we can successfully integrate your products into our distribution network.
MadeinChina Team
Jun 30, 2026 at 2:00 AM Reply
I am writing to introduce M/S. Pharmansia, an established indenting and procurement firm based in Ahmedabad, Gujarat, India. While our core operations have historically focused on sourcing and trading within the pharmaceutical sector, we are actively expanding our commercial portfolio.
We are currently diversifying into the import and domestic marketing of self-heating packaging solutions. Our extensive experience managing complex supply chains and rigorous quality standards positions us well to successfully introduce and distribute innovative packaging technologies across the Indian market.
Our immediate goal is to partner with a reliable Original Equipment Manufacturer (OEM) capable of supplying these solutions under our clients' established brand names. We have identified strong demand and are specifically targeting clients in two primary sectors:
Ready-to-Cook (RTC) Meal Brands: Focusing on convenient, on-the-go meal solutions optimized for domestic travelers.
Corporate Canteen Contractors: Catering to large-scale food service operators who hold exclusive tie-ups with corporate facilities and require efficient, heat-on-demand solutions.
Given these specific use cases, could you please review your current lineup and suggest which of your self-heating products would be the most suitable fit for our clients?
Additionally, we would appreciate it if you could provide:
Your latest product catalog and technical specifications.
Minimum Order Quantity (MOQ) requirements for OEM/private labeling.
Estimated pricing structures and lead times.
We are highly interested in establishing a long-term collaboration with your manufacturing team. I look forward to your recommendations and to discussing how we can successfully integrate your products into our distribution network.
MadeinChina Team
Jun 30, 2026 at 2:00 AM Reply
Dear ANKIT,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied Matt Gonzales
- Jun 29, 2026 at 11:45 PM United States
I am interested in this product. Do the molds come with the machine? Is it a good compression?
MadeinChina Team
Jun 30, 2026 at 12:00 AM Reply
MadeinChina Team
Jun 30, 2026 at 12:00 AM Reply
Dear Matt,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied Nguyen Van Chung
- Jun 29, 2026 at 10:22 PM Vietnam
Require system weighing & packing for Rice , from 0.5 kg- 50kg
MadeinChina Team
Jun 30, 2026 at 12:00 AM Reply
MadeinChina Team
Jun 30, 2026 at 12:00 AM Reply
Dear Nguyen,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied Luis Schmalfeld
- Jun 29, 2026 at 10:17 PM Germany
Please contact me for a Request for Quotation about 400 pcs a year.
MadeinChina Team
Jun 30, 2026 at 12:00 AM Reply
MadeinChina Team
Jun 30, 2026 at 12:00 AM Reply
Dear Luis,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied Praveen
- Jun 29, 2026 at 9:52 PM India
Hi, my self praveen from india, we are in plastic household manufacturing business from last 24 years, Want to know more about folding bucket, are you supplying this product in india.
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
Dear Praveen,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied Abid Hussain
- Jun 30, 2026 at 1:25 PM Netherlands
Dear Mr. Michael Yang,
My name is Abid Hussain. I am a Pakistani national and a recent graduate of the Master's in Finance program at SWUFE in Chengdu. I have a strong interest in international trade and sales.
I noticed that Chengdu UE Industrial exports to many countries. I would love to discuss how my background in finance, cross-cultural communication, and my Pakistani nationality could help your company expand in Pakistan and South Asia.
I have attached my CV for your review. Please let me know if you would like to discuss this further.
Best regards,
Abid Hussain
MadeinChina Team
Jun 30, 2026 at 2:00 PM Reply
My name is Abid Hussain. I am a Pakistani national and a recent graduate of the Master's in Finance program at SWUFE in Chengdu. I have a strong interest in international trade and sales.
I noticed that Chengdu UE Industrial exports to many countries. I would love to discuss how my background in finance, cross-cultural communication, and my Pakistani nationality could help your company expand in Pakistan and South Asia.
I have attached my CV for your review. Please let me know if you would like to discuss this further.
Best regards,
Abid Hussain
MadeinChina Team
Jun 30, 2026 at 2:00 PM Reply
Dear Abid,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
MadeinChina Customer Service Team
- has replied Sophie COSMA
- Jun 29, 2026 at 9:20 PM Ukraine
I used to work with Tick@420sm******essory.com for silicon ashtrays and I would like to reorder.
Can you contact me : s.cosma@s*****b.com.
Thanks
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
Can you contact me : s.cosma@s*****b.com.
Thanks
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
Dear Sophie,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made in China Customer Service Team
- has replied magesa william
- Jun 29, 2026 at 9:19 PM Tanzania
I am interested in Yamaha Psr-Sx900 electronic keyboard, May you please contact me on my whatsaApp no. +2557*****342
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
Dear magesa,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made in China Customer Service Team
- has replied prabhu
- Jun 29, 2026 at 8:52 PM India
Do you make white label product, do you supply sample
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
Dear prabhu,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made in China Customer Service Team
- has replied Sayeeda Habib
- Jun 29, 2026 at 8:25 PM Netherlands
Hi
We operate as an independent procurement consulting company accredited in facilitating supplier sourcing and procurement support for international and institutional projects.
We are currently identifying potential partners for procurement opportunities related to the ongoing 2026 annual projects of the African Union (AU).
We would like to know more about your ability to handle and complete projects if awarded a contract.
Payment terms for approved contracts shall be determined in accordance with the final agreement between the purchasing organization (African Union) and your company as the selected supplier, including applicable advance payment and delivery conditions where necessary.
And in the event that you/company is selected and awarded a contract, our consulting commission will be 2% of the total contract value upon successful contract execution and settlement.
If you are interested in exploring these opportunities, kindly reply to this message by email on our official email address below:
Email: info@88*****cingltd.co.uk
and we will be pleased to share more details.
Kind regards,
Sayeeda Habib
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
We operate as an independent procurement consulting company accredited in facilitating supplier sourcing and procurement support for international and institutional projects.
We are currently identifying potential partners for procurement opportunities related to the ongoing 2026 annual projects of the African Union (AU).
We would like to know more about your ability to handle and complete projects if awarded a contract.
Payment terms for approved contracts shall be determined in accordance with the final agreement between the purchasing organization (African Union) and your company as the selected supplier, including applicable advance payment and delivery conditions where necessary.
And in the event that you/company is selected and awarded a contract, our consulting commission will be 2% of the total contract value upon successful contract execution and settlement.
If you are interested in exploring these opportunities, kindly reply to this message by email on our official email address below:
Email: info@88*****cingltd.co.uk
and we will be pleased to share more details.
Kind regards,
Sayeeda Habib
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
Dear Sayeeda,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made in China Customer Service Team
- has replied Sayeeda Habib
- Jun 29, 2026 at 8:24 PM Netherlands
Hi
We operate as an independent procurement consulting company accredited in facilitating supplier sourcing and procurement support for international and institutional projects.
We are currently identifying potential partners for procurement opportunities related to the ongoing 2026 annual projects of the African Union (AU).
We would like to know more about your ability to handle and complete projects if awarded a contract.
Payment terms for approved contracts shall be determined in accordance with the final agreement between the purchasing organization (African Union) and your company as the selected supplier, including applicable advance payment and delivery conditions where necessary.
And in the event that you/company is selected and awarded a contract, our consulting commission will be 2% of the total contract value upon successful contract execution and settlement.
If you are interested in exploring these opportunities, kindly reply to this message by email on our official email address below:
Email: info@88*****cingltd.co.uk
and we will be pleased to share more details.
Kind regards,
Sayeeda Habib
888 SOURCING LIMITED
Staines-upon-Thames, UK
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
We operate as an independent procurement consulting company accredited in facilitating supplier sourcing and procurement support for international and institutional projects.
We are currently identifying potential partners for procurement opportunities related to the ongoing 2026 annual projects of the African Union (AU).
We would like to know more about your ability to handle and complete projects if awarded a contract.
Payment terms for approved contracts shall be determined in accordance with the final agreement between the purchasing organization (African Union) and your company as the selected supplier, including applicable advance payment and delivery conditions where necessary.
And in the event that you/company is selected and awarded a contract, our consulting commission will be 2% of the total contract value upon successful contract execution and settlement.
If you are interested in exploring these opportunities, kindly reply to this message by email on our official email address below:
Email: info@88*****cingltd.co.uk
and we will be pleased to share more details.
Kind regards,
Sayeeda Habib
888 SOURCING LIMITED
Staines-upon-Thames, UK
MadeinChina Team
Jun 29, 2026 at 10:00 PM Reply
Dear Sayeeda,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made in China Customer Service Team
- has replied Cedrick
- Jun 29, 2026 at 7:58 PM Rwanda
Hello, I’m Cedrick from Rwanda, can I get your WhatsApp I’m planning to come in
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
Dear Cedrick,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made in China Customer Service Team
- has replied Abby
- Jun 29, 2026 at 7:32 PM United States
Film lace
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
Dear Abby,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made in China Customer Service Team
- has replied Abby
- Jun 29, 2026 at 7:30 PM United States
Hd film lace
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
Dear Abby,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made in China Customer Service Team
- has replied Pavel
- Jun 29, 2026 at 7:21 PM Russia
Hello, I am Pavel, my company is located in the Republic of Belarus and would like to be able to buy this product.
If possible, do you have the opportunity to sell it to us?
1.Hydraulic pumping station with a multi-core jack for mechanical fastening of tensioned reinforcement during tension with a force of at least 600 kN and after transferring the compression force to concrete with a reinforcement rope size 15.7 St1860 EN 10138-3-Y1860S7-15.2-F1-C1 with a diameter of 15.7 mm in the following composition: - hydraulic oil pump for a stranded jack in the amount of 2 pieces; - stranded jack for three ropes in the amount of 2 pieces; - triple anchor with wedge-shaped anchor clamp complete with connecting sleeve and plug in the amount of 3470 sets.
2.Hydraulic pumping station with a single-core jack for mechanical fastening of tensioned reinforcement during tension with a force of at least 200 kN and after transferring the compression force to concrete with a reinforcement rope size 15.7 St1860 EN 10138-3-Y1860S7-15.2-F1-C1 with a diameter of 15.7 mm in the following composition: - hydraulic oil pump for single-core jack - 2 pieces; - single-core jack - 2 pieces; - single monoanker with wedge-shaped anchor clip complete with connecting sleeve and plug - 1600 sets.
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
If possible, do you have the opportunity to sell it to us?
1.Hydraulic pumping station with a multi-core jack for mechanical fastening of tensioned reinforcement during tension with a force of at least 600 kN and after transferring the compression force to concrete with a reinforcement rope size 15.7 St1860 EN 10138-3-Y1860S7-15.2-F1-C1 with a diameter of 15.7 mm in the following composition: - hydraulic oil pump for a stranded jack in the amount of 2 pieces; - stranded jack for three ropes in the amount of 2 pieces; - triple anchor with wedge-shaped anchor clamp complete with connecting sleeve and plug in the amount of 3470 sets.
2.Hydraulic pumping station with a single-core jack for mechanical fastening of tensioned reinforcement during tension with a force of at least 200 kN and after transferring the compression force to concrete with a reinforcement rope size 15.7 St1860 EN 10138-3-Y1860S7-15.2-F1-C1 with a diameter of 15.7 mm in the following composition: - hydraulic oil pump for single-core jack - 2 pieces; - single-core jack - 2 pieces; - single monoanker with wedge-shaped anchor clip complete with connecting sleeve and plug - 1600 sets.
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
Dear Pavel,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made in China Customer Service Team
- has replied Pavel
- Jun 29, 2026 at 7:20 PM Russia
Hello, I am Pavel, my company is located in the Republic of Belarus and would like to be able to buy this product.
If possible, do you have the opportunity to sell it to us?
1.Hydraulic pumping station with a multi-core jack for mechanical fastening of tensioned reinforcement during tension with a force of at least 600 kN and after transferring the compression force to concrete with a reinforcement rope size 15.7 St1860 EN 10138-3-Y1860S7-15.2-F1-C1 with a diameter of 15.7 mm in the following composition: - hydraulic oil pump for a stranded jack in the amount of 2 pieces; - stranded jack for three ropes in the amount of 2 pieces; - triple anchor with wedge-shaped anchor clamp complete with connecting sleeve and plug in the amount of 3470 sets.
2.Hydraulic pumping station with a single-core jack for mechanical fastening of tensioned reinforcement during tension with a force of at least 200 kN and after transferring the compression force to concrete with a reinforcement rope size 15.7 St1860 EN 10138-3-Y1860S7-15.2-F1-C1 with a diameter of 15.7 mm in the following composition: - hydraulic oil pump for single-core jack - 2 pieces; - single-core jack - 2 pieces; - single monoanker with wedge-shaped anchor clip complete with connecting sleeve and plug - 1600 sets.
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
If possible, do you have the opportunity to sell it to us?
1.Hydraulic pumping station with a multi-core jack for mechanical fastening of tensioned reinforcement during tension with a force of at least 600 kN and after transferring the compression force to concrete with a reinforcement rope size 15.7 St1860 EN 10138-3-Y1860S7-15.2-F1-C1 with a diameter of 15.7 mm in the following composition: - hydraulic oil pump for a stranded jack in the amount of 2 pieces; - stranded jack for three ropes in the amount of 2 pieces; - triple anchor with wedge-shaped anchor clamp complete with connecting sleeve and plug in the amount of 3470 sets.
2.Hydraulic pumping station with a single-core jack for mechanical fastening of tensioned reinforcement during tension with a force of at least 200 kN and after transferring the compression force to concrete with a reinforcement rope size 15.7 St1860 EN 10138-3-Y1860S7-15.2-F1-C1 with a diameter of 15.7 mm in the following composition: - hydraulic oil pump for single-core jack - 2 pieces; - single-core jack - 2 pieces; - single monoanker with wedge-shaped anchor clip complete with connecting sleeve and plug - 1600 sets.
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
Dear Pavel,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made-in-China Customer Service Team
- has replied industrial mast lift for Nova
- Jun 29, 2026 at 6:39 PM Kazakhstan
Good afternoon.
I would like to ask you to consider supplying one industrial mast lift with delivery to the village of Akzhal, Shetsky District, Karaganda Region, Kazakhstan, from Nova Zinc LLP.
Model SC100
height 120 meters
load capacity 1000 kg
speed 90 m/min
nominal lifting height 300 m
Please write your email address
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
I would like to ask you to consider supplying one industrial mast lift with delivery to the village of Akzhal, Shetsky District, Karaganda Region, Kazakhstan, from Nova Zinc LLP.
Model SC100
height 120 meters
load capacity 1000 kg
speed 90 m/min
nominal lifting height 300 m
Please write your email address
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
Dear industrial,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made-in-China Customer Service Team
- has replied m.h.beigi
- Jun 29, 2026 at 6:37 PM Iran
Dear Sales Team,
We are a Dubai-based trading company looking for a reliable supplier for the following OEM-equivalent parts:
─────────────────────────────────────────────────
Chery Tiggo 3 & Tiggo 5
─────────────────────────────────────────────────
Part Name OE Number Vehicle
Engine Oil Pump 484FC-1011030 Tiggo 3 & 5
Piston Assembly 484FC-1004020 Tiggo 3 & 5
Gearbox Chain 019CHA-1502610 Tiggo 3 & 5
Gearbox Oil Pump 019CHA1502610 Tiggo 3 & 5
CVT Repair Kit 019CHA-150001-XLB Tiggo 3 & 5
─────────────────────────────────────────────────
JAC S5 & S3
─────────────────────────────────────────────────
Part Name OE Number Vehicle
Oil Cooler 1726101DT000 JAC S5
Cylinder Head (Complete) 1003101GD053 JAC S5
Front Grille 2803120U221G JAC S3
We would appreciate it if you could provide the following:
1. Availability: Which of the listed items are available or can be produced?
2. Pricing: Best FOB price (USD) per unit.
3. Tiered Pricing: For volumes.
4. MOQ: Minimum Order Quantity for each specific item.
5. Lead Time: Estimated production time after order confirmation.
6. Quality: Please confirm these are OEM-equivalent quality.
7. Profile: Are you a manufacturer or a trading company?
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
We are a Dubai-based trading company looking for a reliable supplier for the following OEM-equivalent parts:
─────────────────────────────────────────────────
Chery Tiggo 3 & Tiggo 5
─────────────────────────────────────────────────
Part Name OE Number Vehicle
Engine Oil Pump 484FC-1011030 Tiggo 3 & 5
Piston Assembly 484FC-1004020 Tiggo 3 & 5
Gearbox Chain 019CHA-1502610 Tiggo 3 & 5
Gearbox Oil Pump 019CHA1502610 Tiggo 3 & 5
CVT Repair Kit 019CHA-150001-XLB Tiggo 3 & 5
─────────────────────────────────────────────────
JAC S5 & S3
─────────────────────────────────────────────────
Part Name OE Number Vehicle
Oil Cooler 1726101DT000 JAC S5
Cylinder Head (Complete) 1003101GD053 JAC S5
Front Grille 2803120U221G JAC S3
We would appreciate it if you could provide the following:
1. Availability: Which of the listed items are available or can be produced?
2. Pricing: Best FOB price (USD) per unit.
3. Tiered Pricing: For volumes.
4. MOQ: Minimum Order Quantity for each specific item.
5. Lead Time: Estimated production time after order confirmation.
6. Quality: Please confirm these are OEM-equivalent quality.
7. Profile: Are you a manufacturer or a trading company?
MadeinChina Team
Jun 29, 2026 at 8:00 PM Reply
Dear m.h.beigi,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made-in-China Customer Service Team
- has replied Alina Mbango
- Jun 29, 2026 at 5:54 PM China
Hello,
本人致函，是为我的水产养殖场询购5台水车式增氧机。我有五个土塘，希望每个池塘配备一台增氧机。
我的池塘规格如下：
3个罗非鱼池塘：每个池塘面积400平方米，水深1.2米（每个池塘水体体积为480立方米）。
2个鲶鱼池塘：每个池塘面积250平方米，水深1.0米（每个池塘水体体积为250立方米）。
增氧机要求（每台）：
类型：水车式增氧机，适合我这种规模的池塘使用。
电机功率：1.5千瓦（2马力）。
性能：标准氧转移效率（SOTR）约为2.6公斤氧气/小时。
材质质量：采用耐用、耐腐蚀的淡水适用材料。具体来说，我需要以下配置：
不锈钢传动轴和机架，确保使用寿命长。
高密度聚乙烯（HDPE）浮体，确保耐用性。
电压：三相，380V~440V（或适合出口至我国的产品）。
认证：优先考虑具有CE、BV或ISO认证的产品。
请提供5台设备的最优惠价格，并包含运至纳米比亚沃尔维斯湾港（Walvisbay Port） 的运费。如能安排运输，也请一并报价。如果贵公司有批量订购折扣，请注明。
期待您的及时报价。
此致
敬礼！
Details for the quotation
Theofulus Naftal
MadeinChina Team
Jun 29, 2026 at 6:00 PM Reply
本人致函，是为我的水产养殖场询购5台水车式增氧机。我有五个土塘，希望每个池塘配备一台增氧机。
我的池塘规格如下：
3个罗非鱼池塘：每个池塘面积400平方米，水深1.2米（每个池塘水体体积为480立方米）。
2个鲶鱼池塘：每个池塘面积250平方米，水深1.0米（每个池塘水体体积为250立方米）。
增氧机要求（每台）：
类型：水车式增氧机，适合我这种规模的池塘使用。
电机功率：1.5千瓦（2马力）。
性能：标准氧转移效率（SOTR）约为2.6公斤氧气/小时。
材质质量：采用耐用、耐腐蚀的淡水适用材料。具体来说，我需要以下配置：
不锈钢传动轴和机架，确保使用寿命长。
高密度聚乙烯（HDPE）浮体，确保耐用性。
电压：三相，380V~440V（或适合出口至我国的产品）。
认证：优先考虑具有CE、BV或ISO认证的产品。
请提供5台设备的最优惠价格，并包含运至纳米比亚沃尔维斯湾港（Walvisbay Port） 的运费。如能安排运输，也请一并报价。如果贵公司有批量订购折扣，请注明。
期待您的及时报价。
此致
敬礼！
Details for the quotation
Theofulus Naftal
MadeinChina Team
Jun 29, 2026 at 6:00 PM Reply
Dear Alina,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made-in-China Customer Service Team
- has replied Martynas
- Jun 29, 2026 at 5:38 PM United States
Hello, are you manufacturing truck wheels in Vietnam? We're looking for truck alloy wheels manufacturer. We're intrested in 9' and 11' alluminium truck wheels. Can you give more information with the prices? Thanks. You can reach me on whatsapp better +370*****330
MadeinChina Team
Jun 29, 2026 at 6:00 PM Reply
MadeinChina Team
Jun 29, 2026 at 6:00 PM Reply
Dear Martynas,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made-in-China Customer Service Team
- has replied Sridhar D
- Jun 29, 2026 at 5:34 PM India
Dear Sir/Madam,
Greetings from Nexora Machinery.
My name is Sridhar, and I am from the Purchase Department at Nexora Machinery. Our company is based in Tamil Nadu, India.
We are currently looking to procure a Vertical Turret Milling Machine. Kindly share your product catalogue, technical specifications, and your best quotation for our review.
We would appreciate your prompt response and look forward to the opportunity of doing business with you.
Thank you.
MadeinChina Team
Jun 29, 2026 at 6:00 PM Reply
Greetings from Nexora Machinery.
My name is Sridhar, and I am from the Purchase Department at Nexora Machinery. Our company is based in Tamil Nadu, India.
We are currently looking to procure a Vertical Turret Milling Machine. Kindly share your product catalogue, technical specifications, and your best quotation for our review.
We would appreciate your prompt response and look forward to the opportunity of doing business with you.
Thank you.
MadeinChina Team
Jun 29, 2026 at 6:00 PM Reply
Dear Sridhar,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made-in-China Customer Service Team
- has replied Mike
- Jun 29, 2026 at 4:54 PM 纳米比亚
1
MadeinChina Team
Jun 29, 2026 at 6:00 PM Reply
MadeinChina Team
Jun 29, 2026 at 6:00 PM Reply
Dear Mike,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made-in-China Customer Service Team
- has replied Yulia
- Jun 29, 2026 at 3:14 PM Netherlands
您好！我公司有大量棉花废料，棉含量为96%。据了解，贵公司生产液体壁纸时需要使用棉纤维。我们希望能与贵司建立长期供应合作关系。
请问贵司是否回收此类棉花废料作为原料？如果可以，请告知贵司的质量要求和采购价格。期待您的回复！
此致
敬礼！
MadeinChina Team
Jun 29, 2026 at 4:00 PM Reply
请问贵司是否回收此类棉花废料作为原料？如果可以，请告知贵司的质量要求和采购价格。期待您的回复！
此致
敬礼！
MadeinChina Team
Jun 29, 2026 at 4:00 PM Reply
Dear Yulia,
We have informed the supplier to contact you as soon as possible. Please check your email.
Sincerely,
Made-in-China Customer Service Team