Subject: Inquiry for Passivated & Oiled Galvanized Steel Coil - ZN800

Dear,
This is Sofya from Russia. I am interested in placing an order for passivated and oiled galvanized steel coils.
Please let me know if you can supply the following specifications:
Zinc Coating: ZN800 (800g/m²) – Please confirm this is opportunity
Thickness (mm): 1.0, 1.2, 1.5, 2.0, 2.5
Width: 1250 mm
Surface Treatment: Passivated and Oiled

Please provide:
Your best FOB price per ton.
Minimum Order Quantity for each thickness.
Lead time for production.
Mill test certificate for ZN800 coating.

Thank you.

MadeinChina Team
Mar 30, 2026 at 4:00 PM Reply

Dear Sofya,
We have notified Shuangjiu (Shandong) Steel Group Co., Ltd. to contact you as soon as possible. Please check your email.
Sincerely, Made in China Customer Service Team

MessageId:2821014741

Good day, dear Partners,

Kindly quote SUMP PUMP PNEUMATIC LIFT 25MTR - 1 pc.
IMPA Code: 591637
Suitable to empty ballast tanks, bilge wells, etc. in emergency cases. Often used for draining cargo holds during and after the washing procedure. Especially preferred where an electric spark may risk ignition or explosion. Required air pressure is 0.59 MPa (6 kgf/cm2).

Best regards,

(Mrs.) Julia Shulgina
Project Manager
Korabelnoe DELO
Mob. +7 906 218 ****
Tel. +7 4012 31* ***
j.shulgina@****-******.ru

MadeinChina Team
Mar 30, 2026 at 4:00 PM Reply

Dear Julia,
We have notified Nanjing Chutuo Shipbuilding Equipment Co., Ltd. to contact you as soon as possible. Please check your email.
Sincerely, Made in China Customer Service Team

MessageId:2831957951

Is this dual frequency microchip (134.2kHz + 13.56MHz NFC NTAG216 in the same capsule)? Got I Car?

MadeinChina Team
Mar 30, 2026 at 12:00 PM Reply

Dear Ariel,
We have notified Shenzhen Tesike Electronic Co., Ltd.  to contact you as soon as possible. Please check your email.

Sincerely, Made-in-China Customer Service Team

MessageId:2820913881

Looking for different peptide such as BPC-157

MadeinChina Team
Mar 30, 2026 at 10:00 AM Reply

Dear Brian,
We have notified Xi'an Czy Biotech Co., Ltd  to contact you as soon as possible. Please check your email.

Sincerely, Made-in-China Customer Service Team

MessageId:2831724071

Hellow, I am Jairo Plata, from Barranquilla, Colombia. I need “Crystalline waterproofing active compound for cementitious systems (without cement filler)”

MadeinChina Team
Mar 30, 2026 at 2:00 AM Reply

Dear Jairo,
We have notified Shenzhen Yimi Life Technology Co., Ltd. to contact you as soon as possible. Please check your email.
Sincerely, Made in China Customer Service Team

MessageId:2820695081

Need H9 seamless pipe 58mmx50mm

MadeinChina Team
Mar 29, 2026 at 6:00 PM Reply

Dear Kamal,
We have notified Shandong Xuanlin Metal Materials Co., Ltd.  to contact you as soon as possible. Please check your email.
Sincerely, Made in China Customer Service Team

MessageId:2820498741

Hello sir,
I am from pakistan. And interesred in your products. So please tell me something's that,
50 pieces price $1.6? Tell is it whole sale rate? Because afrer purchaing your products i want to resale it.

MadeinChina Team
Mar 29, 2026 at 6:00 PM Reply
Dear Muhammad,
We have notified Shenzhen Amengwei Jewelry Co., Ltd.  to contact you as soon as possible. Please check your email.

Sincerely, Made-in-China Customer Service Team

MessageId:2820442941

Hello, I need 4D peelable gummy candy (strawberry/mango).

Quantity: 500 kg
Private label: yes

Please send:
- price per kg FOB
- MOQ
- real photos & videos
- packaging options
- certificates

Delivery to Ukraine

MadeinChina Team
Mar 29, 2026 at 4:00 AM Reply

Dear Yevgen,
We have notified Funnystar Food Co., Ltd to contact you as soon as possible. Please check your email.
Sincerely, Made in China Official Team

MessageId:2820199961

Hello, i need RSS3 rubber if you have please contact me in my wechat .+93799005300

MadeinChina Team
Mar 29, 2026 at 12:00 AM Reply

Dear Noman,
We have notified XIAMEN XINGMIN RUBBER IMPORT AND EXPORT CO.,LTD  to contact you as soon as possible. Please check your email.
Sincerely, Made in China Customer Service Team

MessageId:2820115021

Have you baby strollers catalogs with price?

MadeinChina Team
Mar 28, 2026 at 10:00 PM Reply

Dear Yusein,
We have notified Baoding Kunlin Industry Co., Ltd. to contact you as soon as possible. Please check your email.
Sincerely, Made in China Official Team

MessageId:2820104921

Good afternoon.
My name is Denis. I represent the trading company AsiCom, based in Karaganda, Kazakhstan. We are looking for a reliable manufacturer of cotton and rubberized work gloves. Please send me your price list.
And one more question: will you be participating in the CIOSHI exhibition in Shanghai? I'd like to fly there and meet you. or how can I find you at the exhibition?

MadeinChina Team
Mar 28, 2026 at 8:00 PM Reply

Dear Denis,

       We have notified LINYI ZHANDA SAFETY PROTECTIVE PRODUCT CO., LTD. to contact you as soon as possible. Please check your email.

       Sincerely, MadeinChina team

MessageId:2831281471

We are looking for Fingertip Pulse Oximeter. Please send us the complete catalog of this product and its wholesale price.

MadeinChina Team
Mar 28, 2026 at 4:00 AM Reply

Dear SAYED,
We have notified Shenzhen Yimi Life Technology Co., Ltd. to contact you as soon as possible. Please check your email.
Sincerely, Made in China Customer Service Team

MessageId:2831014671

Hello,

I am from India and interested in your product.

I want to start with a small order.
Please share:

Best price (MOQ)
Product details & specifications
Sample availability
Shipping cost to India

Looking forward to your reply

MadeinChina Team
Mar 28, 2026 at 12:00 AM Reply

Dear Vijay,
We have notified Shenzhen Yunmu Technology Co., Ltd. to contact you as soon as possible. Please check your email.
Sincerely, Made-in-China Customer Service Team

MessageId:2830873771

Hello! I am interesting OEM NU. I am from Russia

MadeinChina Team
Mar 28, 2026 at 12:00 AM Reply

Dear Alina,
We have notified Zhengzhou Linnuo Pharmaceutical Co., Ltd. to contact you as soon as possible. Please check your email.
Sincerely, Made in China Official Team

MessageId:2819899681

Dear Team,

Greetings from Sankalpa Business Slolutions.
We are looking for black MDPE and HDPE polyethylene jacketing compounds for energy and communication cables, suitable for export-grade power and telecom cable applications.
Key Technical Requirements
1. MDPE Jacketing Compound
• Black medium-density PE jacketing compound with approx. 2.6% carbon black
• Density around 0.94–0.95 g/cm³
• MFR ~0.7 g/10 min at 190 °C / 2.16 kg
• Excellent ESCR, low shrinkage, and good UV/weather resistance
• Compliance with EN 50290-2-24, IEC 60502-2 / IEC 60840 Type ST7, or equivalent standards
2. HDPE Jacketing Compound
• Black high-density PE jacketing compound with approx. 2.5% carbon black
• Density around 0.95–0.96 g/cm³
• MFR ~0.5 g/10 min at 190 °C / 2.16 kg
• Very high ESCR, high stiffness (flexural modulus ~1000 MPa)
• Very low water permeability and low heat deformation
• Compliance with EN 50290-2-24, DIN VDE 0207 Type 2YM3, and cable standards such as IEC 60502-2 / IEC 60840 Type ST7, HD 620, or equivalent
Kindly let us know your closest equivalent grades for both MDPE and HDPE jacketing compounds and provide the following details:
1. Export pricing (FOB India) for trial and regular quantities
2. Minimum order quantity (MOQ)
3. Lead time
4. Packaging details
For your reference, we are based in Bengaluru and plan to use these compounds for export-oriented cable production. Our monthly requirement is approximately 20 tons each for MDPE and HDPE compounds.

MadeinChina Team
Mar 27, 2026 at 8:00 PM Reply

Dear Sowmya,
We have notified Ningbo Qingteng Plastic Co., Ltd to contact you as soon as possible. Please check your email.
Sincerely, MadeinChina Official Team

MessageId:2819849101

Hello, we are a company from Ukraine and we are interested in purchasing engines LX-WP-40. Could you please provide the price? The technical specifications are attached. this is my whats up +3809816*****

MadeinChina Team
Mar 27, 2026 at 8:00 PM Reply

Dear Alona,

       We have notified Shandong Lianxin Power Technology Co., Ltd. to contact you as soon as possible. Please check your email.

       Sincerely, MadeinChina team

MessageId:2819796501

Hello, I hope you are doing well. I would like to inquire about these products. Could you please confirm if they are original?
Additionally, I would appreciate it if you could provide the available sizes for each item, and let me know if there are any other sizes beyond those currently shown.
Thank you in advance for your assistance.

MadeinChina Team
Mar 27, 2026 at 8:00 PM Reply

Dear Ahmed,

       We have notified Shandong Chik Bearing Co., Ltd. to contact you as soon as possible. Please check your email.

       Sincerely, MadeinChina team

MessageId:2830819771

Hello,

I would like to buy two fuel tanks to test (500l for gasoline and diesel). How is the shipping organized to Europe (Estonia), is it on your costs or it’s extra fee? What is the estimated delivery time.

MadeinChina Team
Mar 27, 2026 at 6:00 PM Reply

Dear Keiro,

       We have notified Wenzhou Xilu Ecommerce Co., Ltd. to contact you as soon as possible. Please check your email.

       Sincerely, MadeinChina team

MessageId:2830811391

Please quote for Complete Off Grid 10 kW Solar System. A solution to cater for the below setup;
Please include freight to FIJI

• Battery bank: 48 kWh usable (≈4 × 51.2V 300Ah batteries)
• Solar array: 12–15 kW capacity
• Panels: 30–40 × 400 W panels

MadeinChina Team
Mar 27, 2026 at 2:00 PM Reply

Dear Brent,

       We have notified Hefei Sunskypv Co., Ltd. to contact you as soon as possible. Please check your email.

       Sincerely, MadeinChina team

MessageId:2819728861

I am wanting a quote for twin 400L stainless steel tanks and circulation pump (>10,000l/hr) complete with
pipes and valving on a portable skid c/w automated CIP software

MadeinChina Team
Mar 27, 2026 at 12:00 PM Reply

Dear Andrew,

       We have notified Guangzhou Maike Machinery Co., Ltd to contact you as soon as possible. Please check your email.

       Sincerely, MadeinChina team

MessageId:2819644201

What happened to the spreaders that were priced at $350. Truly interested in purchasing some. Additionally what would the total cost be per unit if delivered to Wickenburg, AZ 85390 Please respond ASAP Thanks

MadeinChina Team
Mar 27, 2026 at 8:00 AM Reply

Dear carole,

       We have notified Baoding So Luen Import&Export Co., Ltd. to contact you as soon as possible. Please check your email.

       Sincerely, MadeinChina team

MessageId:2830399951

Hi, can you tell me how far out in production for the teardrop camper with wet bath. And price to ship with tariffs? So total breakdown m. I’m in Livingston, MT 59047

MadeinChina Team
Mar 27, 2026 at 6:00 AM Reply

Dear Judy ,
       We have notified Weifang Choice-Link Trading Co., Ltd. to contact you as soon as possible. Please check your email.
       Sincerely, MadeinChina team

MessageId:2830428711

hi do you have a catalog of peptides im intrested in buying. And do you send to mexico ?

MadeinChina Team
Mar 27, 2026 at 4:00 AM Reply

Dear Andres,
       We have notified Suzhou Redgia Biotech Co., Ltd. to contact you as soon as possible. Please check your email.
       Sincerely, MadeinChina team

MessageId:2830325111

Interested in cagrilintide/retatrutide/tirzepatide

MadeinChina Team
Mar 27, 2026 at 4:00 AM Reply

Dear Jessica,
       We have notified Chongqing Rinu Trading Co., Ltd. to contact you as soon as possible. Please check your email.
       Sincerely, MadeinChina.com team

MessageId:2830378691

would like pricing for tirz and reta. thank you.

MadeinChina Team
Mar 27, 2026 at 2:00 AM Reply

Dear dave,
       We have notified Chongqing Rinu Trading Co., Ltd. to contact you as soon as possible. Please check your email.
       Sincerely, MadeinChina.com team

MessageId:2819487961

Is this available in 800mm? How much will be the price?

MadeinChina Team
Mar 27, 2026 at 2:00 AM Reply

Dear Suraj,

       We have notified Hangzhou Jinghu Glass Co., Ltd. to contact you as soon as possible. Please check your email.

       Sincerely, MadeinChina team

MessageId:2830314391

We are planning to establish a new syringe manufacturing project and are looking for a reliable supplier for 5 ml needles with caps.

Our planned production capacity is 3 million syringes per month. We would like to receive a brief quotation for the needles, including:

· Needle type: Luer Slip
· Size: 0.6×25mm 42mm
· With protective cap
· Price per piece or per box

Please also let us know about your minimum order quantity (MOQ) and lead time.

Thank you, and we look forward to your reply.

Best regards,

MadeinChina Team
Mar 27, 2026 at 2:00 AM Reply

Dear Mohammed,

       We have notified Shanghai Eastern Medtech Co., Ltd. to contact you as soon as possible. Please check your email.

       Sincerely, MadeinChina team

MessageId:2819527141

Dear Mr. Vic / Ms. Lynn,

I found your company through Made-in-China and see that your business model is a "Manufacturer & Trader," specializing in work and safety gloves.

I am looking for a commission-based sourcing agent in Linyi to help me purchase 60,000 pairs of nitrile-coated polyester work gloves for construction. I am not looking for a reseller but for an agent who works on commission.

My proposal:
- You act as my agent to negotiate with small factories
- I pay the factories directly
- You receive a commission (3-5%) on the total order value

Order details:
- Product: Nitrile-coated polyester work gloves for construction
- First order: 60,000 pairs
- Recurring orders if successful

Questions:
1. Do you offer commission-based sourcing services?
2. What is your commission rate?
3. Can you share samples and a price estimate for 60,000 pairs?

My company details:
Beavertools
4505 Sages Avenue, Indian Trail, North Carolina 28079
Attention: Ramon Riofrio
Tel: +1 704 369 ****
Email: i**o@****tools.us

MadeinChina Team
Mar 27, 2026 at 12:00 AM Reply

Dear Ramon,

       We have notified SHANDONG DONGTIE LABOUR SUPPLIES CO., LTD. to contact you as soon as possible. Please check your email.

       Sincerely, Made in China team

MessageId:2819547401

Dear Sales Team,

We are interested in purchasing J0010 Ethylene Propylene Rubber (EPM) in a 20’ GP container load. Please provide your best quotation on a CIF Gebze/Istanbul basis, including:

Product Specifications:
- Appearance: White pellet
- Volatility: ≤0.60% (GB/T 24131-2009)
- Ash Content: ≤0.04% (GB/T 4498.1-2013)
- Ethylene Content: 48.1–53.1% (SH/T 1751-2005)
- Mooney Viscosity ML (1+4) 100 °C: 8–13 (GB/T 1232.1-2000)
- Shearing Stability Index (SSI): 20–24

Please also include:
- Packing details (25 kg bags / metal cases)
- Total loading weight per 20’ container
- Delivery lead time
- Payment terms (T/T or L/C)
- Certificates and compliance documents (GB/T, SH/T standards)

Kindly send us your official quotation at your earliest convenience.

Best regards.

MadeinChina Team
Mar 27, 2026 at 12:00 AM Reply

Dear AlptekinBuyukkilic,
       We have notified Tianjin Kangxin Import and Export Co., Ltd to contact you as soon as possible. Please check your email.
       Sincerely, Made in China team

MessageId:2819513401

Dear Ms. Cheery Zhou,

I found your company through trade data and I see that you specialize in gloves and work as a trading company with multiple factory partners.

I am looking for a commission-based sourcing agent in Linyi to help me purchase 60,000 pairs of nitrile-coated polyester work gloves for construction.

Important: I am not looking for a reseller. I want a sourcing agent who works on commission.

My proposal:
- You act as my agent to negotiate with small factories in Linyi
- I pay the factories directly
- You receive a commission (3-5%) on the total order value

Order details:
- Product: Nitrile-coated polyester work gloves for construction
- First order: 60,000 pairs
- If successful: recurring orders

Questions:
1. Do you offer commission-based sourcing services?
2. What is your commission rate?
3. Can you share samples and a price estimate for 60,000 pairs?

My company details:
Beavertools
4505 Sages Avenue, Indian Trail, North Carolina 28079 EEUU
Attention: Ramon Riofrio
Tel: +1 704 369 4137
Email: info@beavertools.us

Thank you, and I look forward to your response.

Best regards,
Ramon Riofrio
Beavertools

MadeinChina Team
Mar 27, 2026 at 12:00 AM Reply

Dear Ramon,

       We have notified Linyi Qikun Imp. & Exp. Co., Ltd.  to contact you as soon as possible. Please check your email.

       Sincerely, MadeinChina team

MessageId:2819569601